The picture in my screen is a pink blur - Canon PowerShot A95 Digital Camera

Sensor failure. Washy, distorted picture. All funny colours.
Replace sensor.

what is the solution for this problem of red blurred pictures

Tv have convergence problems,it dead.Colors lines R,G,B don't aligned.The tv convergence board is dead.The 2 STK convergence ICS and some or all it resistors are dead,these parts must be replaced to solved the tv pictures covergence problems.The shop,will cost u $300-350 for parts and labors.

Hi.

If pictures are pink and blurred shadow-like on all settings, both on LCD and on picture files, then you have a faulty CCD sensor.

The CCD sensor is the device that captures light to generate the digital picture.

Depending on the camera model number the CCD sensor fault is repaired at factory expenses. Call Nikon at the number listed on the owner manual, and find if the fault will be covered by recall.

If pictures are not blurred, but well defined and just kind of purple, then the green or blue channel is not working. In that case diagnosis requires testing to find out where the problem is.

Regards.

E-mail your question to Kodak at: http://www.kodak.com/global/en/service/contactKodak/email/consumerDigital_contact.jhtml?pq-path=13452

If you can view old / stored picture clearly then it seems ccd imager defective in your Canon A75 camera. You will see noisy bars / pink shades. Canon will repair it free of cost.
Click Canon CCD Imager Advisory for details.

The problem is with the CCd ..... Kindly get it replaced ...

Canon will resolve this problem free of cost as per announced Canon CCD Advisory.
Your Canon A95 has problem with CCD Imager and this part will be replaced by Canon Support free of cost. Click above said web link to get details.
Have a nice day.

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

CCD sensor faulty ( it starts with 'noisy' picture and ends with no image whatsoever ). The sensor should be replaced free of charge since properly manufactured one should last you 15 + years.