Maytag Washer Problem

Rinse on most washers is cold water your wash cycles can be cold hot and even warm. Problem You may have is a bad water feed valve Or Timer and possible bad wire harness at motor to timer
check water valve Turn washer to regular wash cycle pull knob on will washer fill ?
if water starts to fill then change washer temp if washer has this.
if water comes out on all settings water valve is fine.
Check the water both hot and cold that it is turned on;at faucet.
Your Kenmore Most likely has a bad water valve check for hot water side clog or not working.

I have found that these links do not always tak you to the same page that see.

Go to www.searspartsdirect.com/ and enter your model number.

Manuals and parts diagrams here.
Maytag Laundry Parts Model LAT9593AAW

http://www.searspartsdirect.com/partsdirect/part-model/Maytag-Parts/Washer-Parts/Model-LAT9593AAW/3048/0153200

Two links for youtube videos.

https://www.youtube.com/results?search_query=maytag+top+loader+will+not+fill+or+agitate

https://www.youtube.com/results?search_query=maytag+LAT9593AAW+won%27t+fill



Maytag Laundry Parts Model LAT9593AAW

Hi,

If your washing machine will not fill, only hot or cold will fill or is slow tofill then read these tips. I have covered many of the things that can happen inthese tips...


Washing Machine Problems No Water

Washing Machine Fix Washing Machine No Water

heatman101

Hi,
Here are a couple of tips that I wrote to help people that are having problems with the washing machine not filling...

Washing Machine Problems No Water
http://www.fixya.com/support/r3880845-washing_machine_problems_no_water

Washing Machine Fix Washing Machine No Water
http://www.fixya.com/support/r3880533-washing_machine_fix_washing_machine_no

heatman101

Is it filling with water?

check the fuse

Hi. your problem is actually a rather complicated one.

Timer and selector switches The timer switch is usually the largest dial on the main control panel. It can be either a mechanical device much like a simple clock, or completely electronic with just a digital readout.

The timer runs the washing machine in a pre-determined pattern. It provides the electricity to all of the washing machine components at the correct time and for the correct length of time.

The Start switch is usually part of the timer knob. When you set the timer to the proper cycle, you either pull or push the timer knob to start the cycle.

The selector switches or knobs vary from machine to machine. Most washing machines have one or several switches or knobs on the control panel besides the Timer/Start switch. These let you adjust certain settings; for example, the water temperature, spin speed, timer cycle, and so on. Normally, the washing machine completes the cycle selected on the timer, regardless of how you set these switches and knobs.

bad contacts in timer ..replace timer

replace water inlet solenoid first if this doesnt work replace timer

Well its definately not your water level switch, so that only leaves your water fill valve at the back of the washer, the cold valve is stuck open by debris. hope this helps