Can't change input to play Xbox without clicker. With tv clicker I could access channel 00, which allowed me to play xbox. now the clicker is broke and I can't access channel 00. can i do this through the TV? I have the TV set up to Comcast , but when I press for cahnnell 00, I only get Channel 01, which is On demand.

The good news is that the red cable is one of the audio channels. Your tv is mono and will work fine without the red cable. You need to hit the input button on your remote or your tv. You can also try hitting the channel down button. Once you get past channel 2 or 3, it should go to the inputs. I hope this helps.

Hello

The Xbox 360 connects to a TV using either

- COMPONENT (red blue green for video, red and white for audio

- COMPOSITE (yellow for video, red and white for audio)

- HDMI

So, if your TV is on a "Channel", it is not on the correct input to view the Xbox 360.

Check the Xbox and verify which cables it is using to connect to the TV. When you find this, follow the cable to the back of the TV and find the input selection. It should be listed as the type and a number (i.e. HDMI 2, COMPONENT 1).

Have the Xbox on. Use the TV remote and use either the INPUT or the MENU options to change the input to the input that matches the port that the Xbox is connected to.

This should make the Xbox work.

When you are done with the Xbox, use the INPUT or MENU to change back to the tuner to watch TV.

Just get a cheap universal remote, and program it to the TV. Some TVs don't have the dedicated buttons to switch inputs, without the remote.

First, remove the XBox from the cable box and move it to the TV inputs. Use the menu on the front of the TV to change the input device you have plugged the XBox into and it will work. In other words, connect the XBox to AV2 in the rear of your television and select AV from the menu as the input for your device and the XBox screen will appear. If you reconnect your cable to the cable input on your cable box and connect the output to your AV1 on the TV, it will detect your stations, as long as you select Cable from the menu for input type. Let m know if you understand what I am saying.

you will have to use component cables with rca's
from xbox plug to rca to plasmas component input
use your plasmas remote to locate a channel to tune int channel o your xbox,when you turn on xbox the start screen should show,dont need a disk for tuning just playing

go forth and have fun .

Cheers MISTERDJ

this is sometimes due to an improper organization of the component jacks in the tv input. it doesnt sound like thats the case considering it was working before, but you might want to take a second look and make sure your colour coded component jacks are in their corresponding inputs.

Sometimes the "Aux" input "channel" is found BEFORE Channel 2 (between your last channel and your first). Other times, you have to use your remote, go to Menu and setup. It varies with almost every TV, so you may have to try all approaches.

if your tv supports this. go to ebay type in "hdmi" buy one for around $10.00 plug into xbox. set your tv to which port you have ,(if you have more then one). bingo,bango ,your done.

"no hdmi"? and you have com. on your tv. plug corrosponding color plugs for component ,L&R audio plugs .
change tv to comp.( not video) your done

Hello,
I had the same issue, turns out all I had to do was change the channel to 00, then my games or whatever I hooked up to the component inputs in the back worked like a champ.

Hope that helps.

Sounds like you are using the Component cables but are not on the correct component channel. Keep searching through your input channels to find the right one. Some older TV's that intergrated component inputs merged them with the normal input channels. I had this same problem with a JVC TV.