I am repeatedly getting an F20 error on my Kenmore HE5t washer. It seams the the spin cylce before the final rinse is the sticking point. I have to unplug, restart and finish the cycle with final rinsie and sping... Suggestions for troubleshooting myself ???

f20 is a water problem,shut off the house water valve,mark the hoses and remove them from the back of washer,stick them into the washer or a bucket and open the valve,if water comes out strong then you have a bad water valve on the washer part WP8540751

Hello,

The F20 error code means; no water was detected entering washer or pressure switch trip was not detected after 6 minutes

Many times that is caused by a blockage a pinched fill hose,or the filter screen on back of washer where hoses attach to are clogged

Good luck,i hope this helps

Gene

F20 No water detected entering machine

Could be a couple things . Clogged inlet screens on the water valve, flow meter gone bad. Pressure tube has sediment in it.



If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

http://www.fixya.com/support/r3608632-f20_error_code

This code is tricky to troubleshoot, so jsrock516 advices to eliminate the easy common sense items first.

http://www.fixya.com/support/r3608632-f20_error_code

http://www.fixya.com/support/r3608632-f20_error_code

This code is tricky to troubleshoot, so jsrock516 advises to eliminate the easy common sense items first

The following link explains the "F20" error code:

http://www.fixya.com/support/r1491905-f20_error_code_whirlpool_duet_kenmore

I recommend checking your washer installation for a possible siphoning condition and kinked fill hoses, first, as these are the easiest items to rule out.

If you have questions, please let me know. I hope this helps you.

The following link explains the "F20" error code:

http://www.fixya.com/support/r1491905-f20_error_code_whirlpool_duet_kenmore

If you have questions, or require additional assistance, please let me know. I hope this helps you.