Woundering on how to change the time on my pioneer radio
How to change the time on a Pioneer DEH 1500 car stereo:
With the radio off, select the 'clock' (upper left button) to display the time.
Press and hold the 'audio' (upper right button) until the time display blinks.
Use the 'select' buttons to select the hour or minutes and adjust time (right button selects minute digits, left button selects hour digit, up button increases the time, bottom button decreases time).
After setting the desired time, 'press any other button to exit the time setting mode'.Just a further comment posted by dognut:
After setting the desired time, 'press any other button to exit the time setting mode'.
You can't post conmments that contain an email address.
Here's how you set the time (from page 16 in the manual):
1: press SOURCE and hold until the unit turns off. 2: Press AUDIO repeatedly until the clock appears in the display 3: Press (left arrow) or (right arrow) to select the segment of the clock display you wish to set (hours, minutes) 4: Press (up arrow) or (down arrow) to set the clock.
- To cancel clock settings, press BAND - to save clock settings press AUDIO until the display stops blinking
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Mosfet 50wx4 indicates a feature of the Pioneer car radio. It isn't a model number. One Pioneer car radio/CD player with this feature is the DEH-1500. On this model, you need to turn off the unit to set the clock. Press and hold the Source button (to the left of the preset tuning buttons) until the device turns off. Press Audio (upper right corner) repeatedly until the clock appears in the display. Use the arrow keys (Skip/Back or Left/Right) on the right hand side of the radio to select a segment of the time to adjust. Use the Up/Down arrows to set the current time. Repeat choosing the time segment and adjusting the time until both the hour and minutes are correct. Press Band or press and hold the Audio button to exit the clock setting mode.
ok when you pull the radio from the dash you should be able to locate a constant power source to the radio. This is for the radios memory , like when you have presets for radio stations. when you unplug the stereo from the harness all memory will be lost and it should reset. Hope this helps ;)
sometimes the harness that you buy to connect to the car harness comes loose or has a poor connection you may need to wiggle it or connect the wires directly and bypass the connectors.
turn radio power OFF, top far right button ( cant remember which one it is ) hold it in, it will start flashing, then you can use the up and down to change time, right to left if hours or minutes....
You can get replacement wiring harnesses from Pioneer (www.pioneerelectronics.com) or from a local stereo shop that sells Pioneer product. Also, check Ebay...there are often times harnesses for sale for any model of radio from all across the country.
Make sure unit is off by pressing and holding the 'Source' button. Wait 3 seconds, and then press and hold the 'Source' button. Do Not Release the button! A display reading "Initial" will show. Then use the arrow buttons surrounding the 'Source' to set clock. The 'Function' button isn't involved, dispite what the manuel states.
Found a posting on another site from 2005, and it worked!
Turn on the radio. Press and hold the "Source" button until the radio goes off. Press and hold the "Audio" button until the numbers flash. Use cursor/arrow buttons to adjust the time. Press and hold the "Audio" button to exit.
How to change the time on a Pioneer DEH 1500 car stereo: With the radio off, select the 'clock' (upper left button) to display the time. Press and hold the 'audio' (upper right button) until the time display blinks. Use the 'select' buttons to select the hour or minutes and adjust time (right button selects minute digits, left button selects hour digit, up button increases the time, bottom button decreases time).
Comment by dognut, posted on Dec 25, 2007
Just a further comment posted by dognut: After setting the desired time, 'press any
Just a further comment posted by dognut:
After setting the desired time, 'press any other button to exit the time setting mode'.
×