PCI Express 2 have in this bord?

1= adjust the reed switch, clean, and tigh the wires connector, see the diagram attached.
2=Tight the ribbon cables from keypads,+ tight the connector from display board vs lower board
3= Lube the deck belt very well, the lack of maintenance produce this effect
4= Test the input motor voltage, if there are, the motor need repair.
see the diagram , and proceed according.

any PCI Express x16 video card will work in this board

you will need to know you motherboard make and model or the manufacture and model of your audio ship to find the correct driver. the motherboard model will be written on the board its self look below the graphic slot (AGP or PCI-Express x16 slot) or beside the the memory

go there http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=827&CategoryID=1&MenuID=16&LanID=0
find the section with the audio driver
install it and restart the pc.
hope this works

What you need to do is make sure your motherboard has a pci express slot as you card is made for pci express...aslo check that you have not put the card into a normal Pci Connection.Assume that now you can see the screen and your disc wont spin just go to nvidia.Here is the direct link your driver.Just select your os ect...and model of card which is 8 series http://www.nvidia.com/Download/index.aspx?lang=en-us Aslo make sure you have connected your screen to your new Graphics card as it will now be the primary output for display...I really hope this helps you :-)

Then you have reinstall *********** boards drivers from its cd.

Refresh the connections to the motherboard (HDD and CD/DVD ROM cables) and clean the RAM as shown in the image below:


Hope this helps.

if usb is not recoginize click on my computer then hardwere then click device manager. look usb softwere is stall or not ? if stall . keep a other usb card in pci slot in computre(mother borD) iblemt means your bord usb system may be damage. in our jeneral practis we face 945 gcr bord are damage many .time. so i like to say if driver not shown your bord usb hardwere system may be damage.

1/ first change motherbord on your desktop.if it is work (your old bord is damage ).then keep graphic card/ vj card on old mother bord slaut. if not work . it is seriously problem.mainly in pinless bord we can"t repair it. change or took it on export

You do not need pci drivers, you need the drivers for the hardware
that you plug into the pci slot. Your motherboard runs the pci.