GE Marquette Eagle 4000 User Manual needed

you can visit this web and you can download service manual for eny devices : http://www.frankshospitalworkshop.com/equipment/ecg_service_manuals.html

Hi...
i would be appreciate those who sends me MAX 1 stress test (workstation) service manual..... i tried a lot to find it but could not make it... do help me. thank you.

i have the same problem, i think you should update the softwere

Hi,
There will be an MOV (metal oxide varistor) After fuse. This MOV is rated 125v. When you plug the machine in to 220v supply this MOV will become shorted and its blows the fuse to prevent further dameges to the power supply. Replace the MOV and then insert the fuse. I have added the image of MOV here. It is placed parallel to the AC mains supply rail after fuse.

Ajin

hi,
You have to check the battery of you monitor . If the battery is short then this problem can occur.
ok

hi,
remove the AC power. then remove the battery from the machine. reinsall the battery after 15 minutes. then power on. it will be at factory settings. if u need its service manual pls contact me through fixya . for removing battery watch the pictures bellow.
ok

Most likely a bad battery which made the system loose the software. Small chance that the screen is bad. If you connect a pulse ox and you hear the hear rate it is a bad screen. If you don't hear it you will need to get a copy of the software and a new battery. GE does not support these anymore so you should contact a third party if you are not able to do it your self.
If you have further questions you can contact me at [email protected] or through our website www.overstockme.com

I can help with these. I also have user guide and service guide. [email protected]

After the battery goes dead in these units it earases the internal software. You need to have the software reinstalled with is a rather tricky thing to do.

I have a user guide to help do this if it is still nessesary.