Kenwood mixer shorted and requires repair

Possible similar model manual for sale on Ebay, but I cannot be certain that is a service manual for yours.

Operator's manual is online for free, but not a service manual.

https://www.ebay.com.au/itm/KENWOOD-CHEF-A901-A901P-MIXER-REPAIR-KIT-ONE-SPEED-BURNING/183286015575?hash=item2aacb2a657:g:KGUAAOSwqU5Z1Obb:rk:3:pf:0



KENWOOD CHEF A901 A901P MIXER REPAIR KIT ONE SPEED BURNING eBay

Hello. your Kenwood Major is A707 ?

the new attachment for front and high speed outlet, not fit in A701/707 ..

Please visit our web site Kenwood Chef Restore in download section. you can download the compatibility of attachments
Regards

Please what model of Kenwood you have ?
if is 901 press the green boton. inside when you up the head.
if with that not working. is necessary check the motor and change some components .

regards
Kenwood Chef Restore

What model is your Kenwood ? to Kamalsalman

A901 models change triac and capacitor .. or centrifugal broken

also check if another's components is faulty.

Kenwood Chef Restore

Found a kit on ebay for 9.99 which fixes the speed cntrol problem on 901 chefs do a search for kenwood motor repair comes with instructions you would need to be ok with a soldering iron

there is a kit on ebay for both 701 and 901 kenwoods requires use of soldering iron do a search for Kenwood motor repair it is unlikely to be the motor usually the speed contoller components

Hello.

the difference between A701A and A901 is :

high speed outlet
slow speed outlet

planetary hub is similar . A701A, A901 and KM series

A701 Different planetary hub and fit different tools.

is not same A720 and A920 A7 = A701/A
A9 = A901 and KM

In our web site Kenwood Chef Restore in Downloads section.
you can download the compatibility of the models A700, A701 , A900 and KM series .

Regards

Hi sometimes, its not the motor, maybe its the speed control, in this model same A701 its centrifugal system, if the capacitor or resistor not working fine, give this smell . you must give your Kenwood for repair or check

kenwoodchefrestore.co.uk

the solution its change the capacitor or triac, normaly problems in models A701 or A901 old motors

regards
kenwoodchefrestore.co.uk

I hope you didn't buy a new one, ours stopped last week after 25 years. All that was needed were new brushes for the motor. Anyone with a screwdriver could replace them. 4Kenwood had the parts to me in a couple of days.