I replaced the roll of paper and now it will not

To load paper into the Casio DR-T220 thermal printer calculator, follow these steps:

1. Open the printer cover by pressing the release button located at the front of the calculator.
2. Carefully insert the roll of thermal paper into the printer with the paper facing forward, and the end of the paper coming out of the top of the roll.
3. Adjust the paper guide to fit snugly against the paper roll.
4. Close the printer cover.
5. Turn on the calculator and press the "Feed" button to advance the paper to the correct position for printing.

Please Note: Be sure to use the correct type of thermal paper for your calculator, as specified in the user manual.

The Caiso DR220HD takes a Universal 2-1/4" x 150' Calculator Paper Rolls

Calculator and adding machine paper rolls.

2-1/4" wide. 150' in length. 1-ply.

Your local office supply store shoudl carry this. or order online here:

Free Shipping On Casio DR 220 HD Paper Roll DR220HD
http://www.worldclassink.com/Casio-DR-220-HD-Paper-Roll-printer21507-ift198.html

If you need further help, I’m available over the phone at https://www.6ya.com/expert/steven_7f54ab9063554f66

Go to Casio Support Webpage and download the Owners Manual.

Here: http://www.casio4business.com/sa/support/downloads/downloads_manuals.html

Put the roll in and feed the loose end up and actually all you need to do is put it between the two pieces of the hinge top. it is a thermal printer so it does not need to be fed like a regular calculator...it took me a few tries before I figured it out.

Hi,
Try the link below.

http://www.casio.com/support/techsupport/calculators

place the paper sticking out of the top, then close the cover. it will start working; good luck

Place the tape between the two posts; then put back portion of cover down followed by the removal front portion - press feed button and it should feed. Remember it will only print on thermal paper ----

http://www.servicecasio.com/download/manual/DR-T220.pdf

Turns out the incorrect type of paper was being used. The paper needed is the paper that is sensitive to pressure and this paper was not.

Try resetting the calculator. There should be a reset button on the underside of the machine. Press it with a pen and that should clear the E that is on your display.