ThemeScene HD65 projector, red thermometer light is on

im after a fan for the optoma hd65 projector its a sunon 12v 3.0w 20x60x60

The red indicator light usually comes on when something needs attention. Most often it has to do with the lamp timer or the filter timer. The projector keeps track of how long it's been since you've changed the bulb or cleaned the filter(s). You can reset these timers in the menu. Be sure to clean the filter before you reset the timer

Try putting the bulb into normal (rather than eco) setting.
Check the bulb is seated correctly.
If this does not help you may have to contact your bulb supplier to see if they can swap bulb for you.

---

Please dont forget to vote this answer was helpful

Many thanks

------

hd65 remote will not work, the one you need is Mfr. Part Number: 45.89U01G001 do a search on google. Or you can possibly order here: http://www.oyyy.co.uk/product.php/94699/optoma-remote-control-for-ep720--ep726-gt3000-dx606
or here: http://www.lambda-tek.com/componentshop/index.pl?prodID=B459214

same for me and a few other people on this site **** from Optoma!!

I think it's a lamp driver issue from what I've seen others have gone through. I also read that if you go through the sequence of unplugging, plug back in, wait 20 seconds and try to turn on, multiple times, it will finally kick on and work. I just got mine to turn back on by doing this and waiting through the fan cycling without the light turning on. After the 4th sequence the light flickered. After the 7th sequence it finally turned on and is working. Now I can watch the Super Bowl and will look into replacing soon.

adjust the resolution to match. also, make sure the monitor port is activated.

hi i am running a scart lead from my sky to my projector with a s-video lead going in the back of my projector but am only getting black and white picture!! can you help

Possible cause is overheating.
Do you hear the fan working?
What happens when you use the lowest level light output?
Does it run longer?

Also possible cause is a faulty temp sensor.
AC wire connection may not be firmly pressed in socket.

Use the warranty! since you anly had it for 8 weeks, and the waaranty last for one year, go back with it and get it repaired or get a new bulb. A buld last at least 2500 hours, in eco mode it last for over 3000 hours.

Good luck to you