Dream Maker Spas Dream Maker Ez Spa Hot Tub Logo
Posted on Oct 01, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Hot tub has power but nothing else works

There is power going to the hot tub, the light comes on but the jets will not power up. I have hit the reset button, unplugged it and nothing happens. We have only had this hot tub for 3 months with an average usage of about 2 times a week.

Answer This Question
  • 1 more comment 
  • A Miller May 11, 2010

    You need to get your dealer over to fix this ... dont mess with it unless you are a skilled technician.

  • Anonymous Sep 12, 2012

    My Maryland Hot Tub wont heat , Spa Pump wont work , Jets not working

  • Anonymous Sep 12, 2012

    Contact Maryland Hot Tub Repair - Pool and Spa Service and set up a Diagnostic service call. Here is there contact info: Maryland Hot Tub Repair - Maryland Pool Service - Maryland Spa Repair Pool Parts - Spa Parts - Hot Tub , Pool and Spa Repair - Pool Opening - Pool Closing - Pool Service 410-304-2463http://www.maryland-hottub-pool-spa-repa... or see them onhttp://marylandhottubrepair.blogspot.com...

×

4 Answers

Anonymous

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Jun 10, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

Joined: Jun 10, 2012
Answers
1
Questions
0
Helped
5664
Points
1

MY control panel was replaced ,it cycles but, no lights ,no jets,no heat works..What's the problem .

Christal Ertel

Christal Ertel

Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Spread the Word:

An expert who has shared 5 answers on their Facebook wall.
New Friend:

An expert that has 1 follower.

  • Expert 81 Answers
  • Posted on Jul 15, 2015
Christal Ertel
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Spread the Word:

An expert who has shared 5 answers on their Facebook wall.
New Friend:

An expert that has 1 follower.

Joined: May 19, 2015
Answers
81
Questions
0
Helped
31397
Points
279

Once more try to turn off the power to the hot tubs and call a service specialist if you wants resolve the issue or when the central electrical wiring is problem.

Ad

Anonymous

Level 1:

An expert who has achieved level 1.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.
Problem Solver:

An expert who has answered 5 questions.

  • Contributor 9 Answers
  • Posted on Sep 12, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.
Problem Solver:

An expert who has answered 5 questions.

Joined: May 19, 2009
Answers
9
Questions
0
Helped
13838
Points
11

Contact Maryland Hot Tub Repair - Pool and Spa Service and set up a Diagnostic service call. Here is there contact info: Maryland Hot Tub Repair - Maryland Pool Service - Maryland Spa Repair Pool Parts - Spa Parts - Hot Tub , Pool and Spa Repair - Pool Opening - Pool Closing - Pool Service 410-304-2463 http://www.maryland-hottub-pool-spa-repa... or see them on http://marylandhottubrepair.blogspot.com...

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points
Hot-Shot:

An expert who has answered 20 questions.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

  • Expert 80 Answers
  • Posted on Oct 01, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
Hot-Shot:

An expert who has answered 20 questions.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Sep 28, 2009
Answers
80
Questions
0
Helped
53163
Points
224

Verify that you are getting power to the pumps when the pumps are told to turn on.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Balboa hot tub controller keeps switching back to Ecn mode
It sounds like the power surge coming back on damaged the controller. Try disconnecting the mains supply overnight to fully dissipate all voltage in the electronics. It that doesn't work, this is the maker, reach out for support.

Wide Selection of Topside Panels

 Balboa Water Group - https://www.balboawatergroup.com > Spa Products

Electronic Controls · Slimline® Jet Collection · Bath Jets · Zen Look Collection ... Balboa the largest manufacturer of hot tub panels in the world. These panels ...

..
Read full answer
Sep 26, 2023 • Pool & Spa
0helpful
1answer

Aeromax tub some jets not blowing air
Hi Claude.
If your spa jets appear to be pulsating or pausing, first check to make sure your filter isnot clogged. If your filter appears to be okay, you should next take a look at your hot tub's water level. If there is too little water, air could be working its way into the system through the jets.

Why are My Hot Tub Jets Not Working? ' Master Spa Parts

How to Replace Water Jets in a Hot Tub
  1. Turn off your hot tub. ...
  2. Reach into the tub and grasp the outside edge of the damaged water jet. ...
  3. Place your water jet face down on a level surface. ...
  4. Line up the notched tab on the back of the jet with the groove inside the jet housing. ...
  5. Turn on your hot tub.
  6. Things You Will Need. ...
  7. References (3) ...
  8. About the Author.

How to Replace Water Jets in a Hot Tub ' Home Guides ' SF Gate

How To Clean Bathtub Jets with Basic Household Ingredients
  1. Fill the tub until the jets are covered by 2-3 inches of hot water.
  2. Add 2 Tablespoons of a low-sudsing dishwashing liquid and 1/2 cup of bleach. ...
  3. Run the tub's jets for 15 minutes.
  4. Empty the tub, and refill it (cold water is fine this time). ...
  5. Drain the tub and rinse it well to get the gunk off.
More items...
•
4 Sep 2014

How To Clean Bathtub Jets with Basic Household Ingredients ...

or read up more at this link.



https://www.google.com/search?q=Aeromax+tub+some+jets+not+blowing+air&rlz=1C1AVFC_enGB797GB798&oq=Aeromax+tub+some+jets+not+blowing+air&aqs=chrome..69i57.7532j0j9&sourceid=chrome&ie=UTF-8
Read full answer
Apr 28, 2019 • Home
0helpful
1answer

1991 Hot Springs Sovereign Model I, lost all power at control panel, power is hot going in, heater element and circ pump are only 1 year old, do I need the whole circuit board?
Yes you do and it's a $270 Part. If it's in good shape and that's the only problem you have with it that's a lot cheaper than having to replace it
Read full answer
Jan 10, 2019 • Pool & Spa
0helpful
1answer

My hot tub has an issue. Only half the display is working, there's no heat and the jets wont turn on. If I trip the curcit, I can get the hot tub jets for 10-30 seconds and that's it. HELp
Almost all hot tubs use 230 volt AC power which comes from the power company in two power wires plus one common common wire. You get common 115 volts between a common and either other wire. "Half way" working could well be an attempt to run on only one of the wires. There is also likely to be a ground fault circuit breaker in the wiring which makes sure current going out to the tub is all returned via the wires and not through someone's legs to ground. If you're comfortable with an AC voltmeter check some voltages but understand that 230 volts is way into the killing range. Two people present and well insulated probes are important.
Read full answer
Apr 15, 2016 • Pool & Spa
0answers

LA SPA Quest Series 2500 when the hot tub switches to the filter cycle it kicks the breaker off. We reset the breaker and the jets and run fine. It does this only when going to filter cycle.
Read full answer
Be the first to answer Mar 14, 2016 • Pool & Spa
0helpful
2answers

My hot tub is not coming on at all and is giving me a Pr code. What can I do?
please follow this steps and fix it. God bless you
If the unit won't start, make sure power is on at the electrical panel or the electrical panel . Then test the pump and the motor. Check for and repair broken wires or loose or corroded terminals. If necessary, have the pump switch control tested and serviced professionally.
If the jets do not work, clear a blocked water intake of hair and other particles (see below) or replace a broken jet (see below).
If the water in your spa or hot tub is too hot or too cold, check to see if the high-limit reset switch has been tripped and, if needed, reset it. Adjust the thermostat setting and have the thermostat serviced if the problem persists. If necessary, test and replace a faulty heating elements
9d4832d5-8a31-4a17-99b3-af20b93aa530.jpg
Read full answer
Nov 26, 2013 • Qca Spas Dream Series Dream Master Hot Tub...
0helpful
2answers

I am getting a Pr code and the tub is not coming on at all
follow this steps and fix it. God bless you
If the unit won't start, make sure power is on at the electrical outletor the electrical panel Then test the pump and the motor. Check for and repair broken wires or loose or corroded terminals. If necessary, have the pump switch control tested and serviced professionally.
If the jets do not work, clear a blocked water intake of hair and other particles (see below) or replace a broken jet (see below).
If the water in your spa or hot tub is too hot or too cold, check to see if the high-limit reset switch has been tripped and, if needed, reset it. Adjust the thermostat setting and have the thermostat serviced if the problem persists. If necessary, test and replace a faulty heating elements
125a10b3-4403-4cc7-8741-9137c999473e.jpg
Read full answer
Nov 26, 2013 • Qca Spas Dream Series Dream Master Hot Tub...
0answers

My hot tub works and everything but I wont work by it self, like in the f2 f4 and so on modes. I have go hit the jet button every 30mins,is this a circuit board or control pad issue. On the top side...
Read full answer
Be the first to answer Feb 11, 2018 • Qca Spas Paradise Hot Tub
0helpful
1answer

Just drained jacuzzi hot tub and replaced circulation pump. Went to turn back on and now nothing works. Can't lights to come on, motor on main hot tub doesn't even turn on. It flashes COOL / FLO2, but jets...
bleed pump check fuses and connections
Read full answer
Sep 22, 2009 • Home
0helpful
1answer

Froze the jacuzzi.
You'll need to start electrical troubleshooting from a point where you have power and then keep testing further into the unit to find out where the power stops. Is there a local 'ground fault' reset button inside the hot tub control area (under the tub?)
Read full answer
Jul 11, 2009 • Home
Not finding what you are looking for?

View Most Popular

Dream Maker Ez Spa Hot Tub

  • Pool & Spa

Related Question

Balboa hot tub controller keeps switching back to Ecn mode

  • Pool & Spa

Related Topics

5,674 views

Ask a Question

Usually answered in minutes!

Popular Questions

How do you replace a flow switch in a spa, or hot tub

Dream Maker Spas Dream Maker Ez Spa...

Foam in hot tub cover broke

Dream Maker Spas Dream Maker Ez Spa...

We have a dreammaker spa, how do we drain it? the

Dream Maker Spas Dream Maker Ez Spa...

My Dream Maker spa won't turn on there is power to

Dream Maker Spas Dream Maker Ez Spa...

Tub is not heating to

Dream Maker Spas Dream Maker Ez Spa...

Top Dream Maker Spas Pool & Spa Experts

john h

Level 3 Expert

29494 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Larry Ng
Larry Ng

Level 3 Expert

14561 Answers

Are you a Dream Maker Spas Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
ZSeriesSpaManual.pdf....

Dream Maker Ez Spa...

Loading...