My tv tla-01911c drowned on the flood. is there any solution to fix my tv

Audio amp may be blown. A cable may be bad.
What are you connected to?

a lo mejor lo tienes enotra seleccion que no es la tv ( ejemplo como en auxiliar on en HDMI 1,2,3, ojala esto te ayude : - )

Good day!!!

all you need to do is to get Philip screw driver and remove all screw that connected to the base of your TV after that you can freely remove that base...


Thanks for using fixya...

http://www.hdtvreview.com/Polaroid-TLA-01911C-hdtv.html

polaroid LCD has white screen and no sound

There's more than one universal remote out there. Check a nearby Walmart, you'll shyt bricks at the sheer amount of universal remotes they offer.

Hello,

The white screen and nothing else usually indicates a failure of the filter capacitors in the power supply board. When these capacitors go out the voltages are not correct so the TV can not power up right. You can rebuild the power board by replacing the bad capacitors and this should bring the TV back to life. Here is a link to a repair guide for this power supply board.

http://www.ccl-la.com/blog/index.php/repairing-a-polaroid-tla-01911c-with-a-bad-power-supply/

I hope this helps,
BuddyMc

Can you see a very faint image? the backlight may be dead. otherwise it could be a number of things.

I called Panasonic customer service and they directed me to their website where I was able to download that portion of the manual that addressed removing the stand.

same (tla-01911c) issue when trying to watch over the air brodcast try rescanning the channels that normally works for me

i got direct tv basic set on my S-video input so i only need over the air when the sat is down (i.e: storms, wind, snow, ...)