At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I dont have access a bios and after the bootprint the message "Detecting floppy drive a media" "Scanning BIOS image in hard disk" "Scanning BIOS image is floppy diskette"and stop this pass.How can i do?Thanks for help someone!!!email = [email protected]
Hi, I'm not quite sure what it is you exactly want here but if you need to get into the BIOS utility then as the computer is starting up repeatedly tap the Del key or the Esc key.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You may have to enable 'A' drive through the bios. Depending on the bios, you need to hit F1 or F2 or F10 at initial start up. You can hit all three at once and get into the bios. Then navigate your way through the bios to find where to enable and disable drives.
to be honest if you have tried to re-flash your bios, and it did not work you still either have hte wrong version or the disc drive your using to flash it from is faulty. try another floppy drive/disc and try again.
if that dont work. to be honest it's not worth getting it repaired just go out and spend £30-40 on a new mobo.
sorry i'm not more helpfull but i dont believe it's worth spending that much time and effort on an old system like that with this kind of problem.
good luck to you. let me know how you get on ok.
Hi how are u, it is simple problem friend
Your motherboard jumper setting has been changed.
please read manual of your motherboard jumper setting if u not have manual. open ur pc cover and see the motherboard jumper.
remove your bios battery and change your jumpers 2-3 by defualt.
i hope u are understand u will change your motherboard jumper settings bye.......from [email protected]
There should be a jumper beside your bios batery there should be 3 pins move the jumper to the last 2 pins for 5 seconds and put it back that should do it
Try pressing F2 / Del key during startup. That should bring the bios setup. Now Restore that defaults & install OS on your HDD. If you are not using Floppy drive, disable the onboard floppy controller from BIOS.
×