Hoover dishwasher error codes

https://service.hoover.co.uk/advice-centre/washing-machines/dynamic-next/

LG Dishwasher Error Code E1 How To Clear
Based on your model number ... it is probably an LG appliance.
Use the link above to learn about the E1 error code. According to the web site ... there is a chance that nothing is broken and the code may have been caused by how the dishwasher was loaded. The web site lists 7 reasons why the E1 code came on.
Helpful?
Good luck with your troubleshooting

AK Techno service is the best service center for repairing and service for all types and brands of washing machines.
For more visit our website. http://aktechnoservice.com/samsung-washing-machine-service-center-in-hyderabad

Hello

error E1 means the water inlet tap is turned off .Clean the filter and the spray arms the error should go away

E1 is a code that the dishwasher displays after detecting a leak. There is a sensor on the pan at the very bottom of the unit. Take the bottom front panel off, look under the unit at the hose coming off the pump and your fill line to be sure no water is dripping. Run the unit in a wash cycle while doing this if possible.

Please look one more time. The LG LDS 5811 dishwasher error codes are:

IE Error
OE Error
FE Error
E1 Error
HE Error
tE Error

It would also be helpful to know what happens when this error code displays. Please post back here, OK?

Thanks.

error code E1 refers to "lack of water inlet pressure" the valve the elctrically lets in the water might be at fault

Hi. Sorry this is so late, but I just happened across this post, so I thought I'd see if you have solved your problem yet. The EI code most often is caused by water leaving the tub during the wash cycle. The most common cause of this is that the dishwasher drain hose does not have a high loop in it. Often, the installer ran the hose right down through the floor. It needs to loop up high before going to the drain to prevent water loss, and a resulting IE code.

WTF, do you have any solution on this stinking website