Gigabyte ga-8i915pm I need motherboard manual of Sunshine (GA-8I915PM Ver 1.1) Gigabyte PC Packard Bell. Thanks

I suggest to visit the manufacturer's website. If manufacturer has changed BIOS or Update the BIOS, the patches or new BIOS will be available there.

Download the right driver from here:
http://www.gigabyte.com/support-downloads/download-center.aspx?kw=8i915&ck=2

you can only use as much as the motherboard are made for.

hello, i have done some searching for you for driver downloads for your motherboard.

on your motherboard there will be a version number something like this that is printed in white:

Ga-865gvmk-775 rev:1.0 or

Ga-865gvmk-775 rev:2.0
the link for your drivers for ver:1.0 is

GIGABYTE Motherboard Socket 775 GA 8I865GVMK 775 rev 1 0

the link for ver:2.0 is

GIGABYTE Motherboard Socket 775 GA 8I865GMK 775 rev 2 0

hope this helps

thank you

Hello try to find the manual here at gigabyte:

http://www.gigabyte.com/support-downloads/download-center.aspx?kw=GA-8I915PM-D&ck=

By typing in the right mainboard number.

Your mainboard is an INTEL based card.

The jumper settings is basicaly the same to almost all mainboard

If my drawings you mean a layout of all the connectors, here is the manual for that particular board.http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/Boards/Motherboards/Gigabyte/GA-8I915PM/Man_GA-8I915PM_uk.pdf

Everything but the Case USBs and Front Panel are keyed meaning they only go in one way. The Front panel doesn't really matter except keep the colored wires all on the same side either all + or all - and it shouldn't matter.

You probably have a Packard-Bell computer. You will need to match the motherboard form-factor to your case.

http://downloads.phpnuke.org/en/download-item-view-z-m-v-z-z-x/GIGABYTE%2BGA-8I915PM.htm
downlooad driver on the page, sp1 if you have service pack one or sp2 if you have service pack 2, working perfectly on windows 7 ultimate 32bit.

Ga-8SIML is a generic gigabyte mobo and does not need a packard bell bios. you could goto the gigabyte site and get latest from there. If your PB displays a logo at the start then its likely that you will lose that logo as the generic bios will not know it was fitted to a PB machine but thats no hardship.
Be sure to check the board version. version 1.0 takes one type of bios ver 3.2 another and they wont load into the wrong versions of the board. F12 is the latest non beta. I just did two of these recently so i know F12 is ok.
suggest you visit gigabyte site anyway just to check how the bios should be blasted and which version supports which mobo model no..

Hello,

you need a new CPU cooler and the part you will be needing is called 'CPU COOLER". Go to any computer accessories shop/store within your vicinity and purchase another CPU cooler. You will need to remove the one from your motherboard and use it as a sample to get another one so that you can get exact size of cooler that will fit your CPU because CPU coolers varies in size and shape.

Good luck.