Change cartridge on epson cx5500

Simply lift the lid by holding under the front LCD screen and lifting.
The Cartridges should come to the middle and you will be able to replace.
I hope this Helps Regards GM

Driver for Epson Stylus CX5500 Printer
Please visit the above link from Epson Official Support and downloads. Select the Operating System you have on you Computer and click search to download the latest drivers.

Hope it helps! Good Luck!
Don't forget to convey your feedback
CreativeTECH

I changed the cartridges in my epson cx5500 but
Problem with the Epson Stylus CX5000 InkJet Photo Printer
i changed the cartridges in my epson cx5500 but its still not working


Hi Good day!! is there any error message? or Blinking orange/red in your printer? if no errors try to restart your printer spooler.
Follow this method:
1. Turn off your printer and then trun it back on see your printer status if it is online and ready.
2. Click "Start"
3. Click "Setting"
4. Click "Control Panel"
5. Choose "Performance and Maintenance"
6. Click "Administrative tools"
7. Click "Services" now you should be on Services box
8. in Services box find "Print Spooler" Click it and then click "stop" at the upper left of the box and then start it again.. hope it works now..

PLEASE DO RE-INSTALL THE DRIVERS

they are proper mardy machines only happy when using original epson cartridges

Ive replaced all the cartridges on my epson 5500 but still nothing prints. Any help gratefully received

http://tech.epson.com.au/downloads/message.asp?platform=winxp&techtips=techtips&EmailAdd=&MetricIDReturned=2681875&submit=Search+%3E%3E&sCategory=Multi_Functional&id=styluscx5500

Here is the manual for your printer

Good luck

Hi,
Go to the below link and follow the steps..

http://www.epson.com.au/products/multifunctional/styluscx5500_specs.asp

Thank you

I had this problem too.
There was no low ink warning but one colour was missing, as seems to be your case.
Either the jet is still blocked or the colour is dry.
I had to change the cartridge and all worked fine.

If you are using a compatible cart and the printer has twice reported the cart as empty when they are new, chances are there is a problem with the printer. You can buy a chip reseter off ebay for a couple of bucks and try resetting the cart. If the machine still reports the cart is empty you either have dodgy chips on your carts or the printer is having problems reading the chip, This could be caused by a bent pin/contact in the print head cartridge receiver.