I DID NOT PRINT SCREEN BEFORE ENDING SESSION SO ALL HELP HE GAVE ME IS LOST

try printing with the right driver and make sure if ur computer is 32 bit or 64 bit...

The Samsung CLP 770 produces an 'incomplete session by time out' if you switch off the computer originating the print in the middle of the print job (before the print is finished) OR if the network connection is lost between the computer originating the print and the CLP 770.
The printer may have printed the start of the print job but also recognises that it has not received the end of the print job information. It waits for a good while for the connection to be restored in an attempt to receive the rest of the print job - but if nothing comes then it times out.
The reason for this action is to prevent this situation effectively locking out any other computer on the network from printing while it 'waits' for the end of the print job.

For this account, an existing session already exists.
To abandon your request (leaving the existing session running), close this browser window. Or, to proceed, ending the existing session, click Continue. This keep me from doing my class work and I have tried everything I can think of to stop this from happening.

Your printer may have recieved a spike from the same lightning and fried the circuit board.
Is it under warranty?
If so call Epson and get an exchange unit.
The MAY help you if you mention the surge

you are in the operating system when you see a blue screen, the bios is before the computer boots int the operating sys, it is like the heart, of a computre, you don't need an operating system fo booting into bios, thats like a new harddrive that would have nothon it yet, the bios must be acccesed prior to booting into windows

Hi again,

Appreciate the direct "Ask Me".

I was under the impression that she did respond to your post here as she has responded to my headsup.

Might I suggest that you:
Signin back to FixYa;
view/go to the Chat Session Transcript;
somewhere down the bottom would be "Post a Comment..." right below the "Print Session"
thereafter, the system would post both of your responses and seemingly continue the Chat though with some time delay.

Good luck and kind regards. Thank you for using FixYa again.

We'd be happy to help.Call us and click here:
https://www.fastsupport.com/758010453

Does the printer print directly without an RDP session?

We got to the point where we had do delete 6 copies of your printer icon. Sorry if you can't follow my lead. This issue only started last night as you stated. The only thing you need to do is to reboot the computer.

I had to resort to use a screen sharing session so that i can see what you are doing. But you were not able to launch the site from www.fastsupport.com.

I have the whole copy of the chat session.

I think trying the solution i gave on this post should solve your problem also http://www.fixya.com/support/t122427-printer_printing_wierd_things_not