Can't pair samsung bluetooth headset wep 350 with my nokia e61i

With that much charge time on it with no results, I'd suspect the battery is gone. You might try Samsung's website to see if a replacement battery is available.

1.first on samsung bluetooth device
2.press& hold call answer button in bluetooth device now light is on ,not blinking
3.and then search your bluetooth device by your phone and pair.

Have you put your BH-503 also in pairing modus?

If the BH-503 isn't in pairing modus no phone can find it!

Good Luck.

1 Enter Pairing mode. • Turn off your headset and press and hold the talk button until the blue indicator light remains lit after blinking. • If you turn it on for the first time, it proceeds into Pairing mode immediately.
2 Search for and pair with your phone --> turn on the bluetooth with the widget on the home screen or in the settings. (Bluetooth PIN: 0000, 4 zeros)
• If the pairing is successful, the blue indicator light will flash 10 times rapidly before entering Standby mode. • If the blue indicator light remains lit, retry pairing.
Good luck!

The Samsung WEP-150 passkey (or PIN, or pairing code) is '0000' (four zeros).
Please, let me know if you need further clarifications on how to pair your headset with other bluetooth enabled devices.
Cheers! Carlos

passcode = 0000 (4 zeros) USER GUIDE

The first time you turn on the headset it will enter "Pairing" mode. In this mode you can connect your headset with your phone or other Bluetooth enabled device. If you have already connected one device to the headset, you can enter Pairing mode by holding the multi-function button turns solid blue.

Once in pairing mode, set your phone or other Bluetooth enabled device to search for the headset. While each device is different, the setting is often found in a "Settings" or "Bluetooth" menu and the "Search" or "Discover" Bluetooth devices option. On the list of discovered devices, choose "Samsung WEP500" and select "Yes" or "Ok" to connect to the device. When asked for the passkey, enter 0000.

Pairing Instructions
Pairing will create a unique and encrypted wireless link between two Bluetooth enabled devices, such as your Bluetooth phone and Bluetooth headset.

Ensure that the headset is off (see Turning the headset on/off).
Press and hold the Multi-Function button until the indicator light turns on in blue (approximately 8 seconds).
Set your Bluetooth phone to discover the headset by following your phone's guide. Typically, the steps involve going to a Setup, Connect, or Bluetooth menu on your phone and then selecting the option to discover Bluetooth devices.
Your phone will find the Samsung WEP210 headset and ask if you want to pair with it. Confirm this by pressing the Yes or OK key.
Enter a passkey or PIN, 0000 (4 zeros), then press the Yes or OK key.

all you need to do hold doown the on button of the samsung wep 200 bluethooth for about 5 sec, till the headphone will enter searchmode, which the led light will be blinking continiously. note:- its possible for it to change color or it may be the same color


then immidiately you see that blinking continiously like that, turn on the bluethooth of your phone and search for audio device around or new pairing, then you will see the name of the samsung headset and now click the name on your nokia phone and it will ask you if you want to pair the device say yes and it will ask you for password its either 1234 or 0000 and thats all.


rate this

It might be the pairing has drifted slightly. I would try repairing again. It certainly cant hurt anything.

You just have to press your blutooth on/off button a bit longer for 15 to 20 sec, when the LED blinking stops (noted that the LED should be turn ON but not blinking), try to search the device again with your phone. By that time your blutooth headset should be recognized by your phone, then select and enter the code 0000.