MY PHONE WON'T RING. WHEN I SET THE RING VOLUME

My iPhone Won't Ring! Here's The Real Reason Why.

www.payetteforward.com > Tech Blog > iPhone

Jul 19, 2014 - When the phone rings, you're going to hear it. ... Most of the time, the reason an iPhone doesn't ring for incoming calls is that the user .... when i checked back, my sound didnt work. do i need to go to the apple store? thanks.

Things to check if your phone doesn't ring when people call

www.centurylink.com/help/index.php?assetid=220

CenturyLinkThings to check if your phone doesn't ring when people call. Your friends and family tell you they try to call and either it just rings and rings or maybe they hear a ...

Volume buttons or ringer not working - iPhone 4 - iFixit

https://www.ifixit.com/.../Volume+buttons+or+ringer+not+working

iFixitSo for two weeks now my side volume buttons don't work. When I try to change .....However, the phone doesn't ring when someone calls or texts. The speakers ...

Why doesn't my landline ring? - phone telephone bt ' Ask MetaFilter

ask.metafilter.com/190429/Why-doesnt-my-landline-ring

Setting the ring tone and ringer volume You can choose one of the four different ring tones and set the ringer volume. To set the ring tone and volume: 1. Make sure that the ringer is turned ON. 2. Press the Set Options key. 3. Press the down arrow three times or press [3] to go directly to the item. 4. Press [3] and follow the instructions on the display. When picking the ring tone, press the volume bar to adjust the volume. 5. Press [Save] to end when you are satisfied with the ring tone and ringer volume.

Who is your carrier? the voice mail is set up via them call or web site. Your phone rings or not rings check ringer volume and ring tone and check if you always have a good signal.

With the phone in standby mode, press the menu/clock key three times.
You hear "Ring time" and the current ring time, and it is displayed on the main base. Then you hear the guidance for setting the ring time.

Press the volume/select-up-down until the desired setting appears.

Press the set key.

Full instructions are in the "Setting the Ring Time" section of the manual (page 36 in my copy). If you need a manual, you can download a copy at
http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/DXAI5588-2om.pdf

Sound Settings
You can customize various sound settings.
Incoming call
Note: When downloading MegaTones® or HiFi RingersTM, charges may apply.

Ringtone.
This menu allows you to select a ring melody. Highlight Ringtone and press . Use the Up or Down key to highlight a ring tone or press the Left or Right key to select a file from either the Default Melodies, Voice list, or Sounds folders. Press the Select soft key.

Volume
This menu allows you to adjust the ring volume to one of 7 levels plus Silent mode and Vibration mode.

• Use the Right or Left key to increase or decrease the volume.

Alert type
This menu allows you to specify how inform you of incoming calls. Use the Right or Left key to select an Alert type.
The following options are available:
- Melody: the phone rings using the ring melody selected in the Ringtone menu.
- Vibration: the phone vibrates but does not ring.
- Melody and vibration: the phone rings and vibrates simultaneously.
- Vibration then melody: the phone vibrates three times and then starts ringing.
- Melody then vibration: the phone rings using the ring melody selected in the Ringtone menu and then vibrates.

Message tone
This menu allows you to set up the ringer for incoming messages. You can set the Tone, Alert type, and Repetition.

• Use the Up or Down Navigation keys to make your selections.

Keypad tone
This menu allows you to select a Beep or a Xylophone for your Keytone and to select the Volume (0-7) that the
phone sounds when you press a key.

• Use the Up or Down Navigation keys to make your selections.

1) With the phone in standby mode, press the menu/clock key three times.
You hear “Ring time” and the current ring time ([2 ], [ 4], [6 ], [T ] Toll
saver), and it is displayed on the main base. Then you hear the guidance for setting
the ring time.

2) Press the volume/select/ or up or down arrow key until the desired ring time appears.

3) Press the set key to select the new ring time. You hear a confirmation tone, then
the announcement “Ring time” followed by the new ring time. After a few
seconds, the system announces “To set record time, press menu again.”

Need the manual for your phone? You can download/print it here:

http://www.uniden.com/pdf/DXAI5588-2om.pdf

Bill B

The phone has to be a member of an ICD group and have the ring set to immediate. Since this is a SYSTEM program, I don't think you can change it without the assistance of a programmer.

If you somehow have access, it's changed in programs 620-622. You need to know which group is assigned, usually group 1 put you can find that in 622. Members are set in 620 and the ring delays are in 621.

Carl

http://toshibasets.com/uploads/Strata_DK_user_guide.pdf

This phone allows you to independently set ring and vibrate modes. When you access "Call Vibrate" to set the mode, also visit the "Call Ringtone" menu to turn off the ringer.

You may want to leave the vibrate mode OFF and your ring tone ON and use the quick keys to switch between ring and vibrate. Two ways to do this, push and hold the # key to switch between normal mode (the settings you chose in "Call Ringtone" and "Call Vibrate") or use the side volume button to access the "Master Volume" and select "All Off", "Vibrate" or a ring tone volume.

If this helps you, please leave me a good rating.

Looks like 6 is the Max, according to the Manual.

Setting the Ring Time
Ring Time allows you to set the number of rings the caller hears before your
answering system plays the outgoing message. You can set the ring time to answer
after two, four, or six rings. If you enable the Toll Saver (TS), the answering system
picks up after two rings if you have new messages and after four rings if there are
none.
1) Enter the Answ. Setup menu, and then the Ring Time
submenu (see "Entering the Menu Option" on
page 16).
2) Press volume up/down to select a Ring Time (Toll
Saver, 2 Times, 4 Times, or 6 Times).
3) Press the OK soft key. You will hear a confirmation tone.

Toll saver is a feature where you can call the phone yourself, if there are messages it wil answer in 2 rings, if not it'll answer in 4 rings. The idea is to hang up on the 3rd ring and save the LD changes.

Hope that fixed Ya...

Geno