With memory card inserted the and file manager accessed the message reads "Memory card not inserted"

Hi Lorinda,

There are a few different reasons why your camera may not be reading the memory card.

Troubleshooting such problems can be a little tricky, especially if no error message appears on your camera's screen.

The cause and solution may include one of the following:

·The card may not be the right type for the camera: First make sure the memory card you are using is compatible with your camera. For example, a SDHC memory card often will not work with older memory card readers. Even though SD memory cards are similar in size and shape to SDHC cards, they use different software for managing the card's data, meaning older readers sometimes cannot recognize the SDHC cards. Sometimes you can solve this issue by updating the memory card reader's firmware to give it the ability to deal with SDHC cards. Check the Web site of the manufacturer for your memory card reader to see if new firmware is available. It is also a good idea to check with your camera's manufacturer (on it's website) to see if an updated version of your camera's firmware is available.

·The card is not fully inserted in the camera. Turn off the camera, insert a card into the slot, then push to seat it.

·The card or a file on the card may be corrupt. Photo file corruption can occur when the battery power is too low when writing a photo file to the card, or when the memory card is removed while the camera is writing a photo file to the card. One way to check if it is the card or your camera is to try moving the memory card to a computer, then try accessing the photo file directly from the computer to see if the file actually is corrupted, or if your camera is just unable to read a particular file.
You can also double check this issue by using another memory card in your camera and see if it works as it should. If the memory card is unreadable on any device, the next step is to reformat the memory card. Look through your camera's on-screen menus to find a "format memory card" command. However, keep in mind that formatting the card will erase all photo files stored on it. Some cameras just work better with a memory card when that memory card is formatted inside the camera. If you do reformat the card, make sure to let the process finish itself before removing the card. Removing a card during formatting may damage the card.

most probably, THERE IS VIRUS. THERE IS WARNING! DONT INSERT THAT MEMORY CARD!. virus will spread to that phone and the phone will also have the same problem even without memory card

ok read and do it carefully
you can remove this icon by followng steps
Press Menue Button
Open Messeging
Now Press Options
choose SIM Messages
Mark All Messeges and copy to INBOX
Mark all again and Delete all messages
Press Back button
Little envelope flashing will no more
Thanks

when i open camera it say please slide up

Transferring images from a Memory Card to a Windows Computer Follow the steps below to transfer images from a memory card to a computer running Windows. Step one: Insert the memory card Follow the steps below to insert the memory card into the HP All-in-One.

1. Turn the memory card so that the label faces left, and the contacts are facing your HP All-in-One.
2. Insert the memory card into the appropriate slot on the HP All-in-One.
   NOTE: Some portable USB flash drives with a read-only partition, such as U3 smart drives, might be incompatible with the front mass-storage port on your HP All-in-One. These read-only partitions are added by the drive manufacturer and may include utilities and other software. Refer to the manufacturer for additional details about your drive. When the memory card is inserted correctly, the Photo light next to the memory card slots begins to blink. The message Reading... appears on the color graphics display. The status light next to the memory card slots blinks green when the card is being accessed. If a memory card is inserted incorrectly, the status light next to the memory card slots blinks amber and the color graphics display shows an error message such as Card is in backwards or Card is not fully inserted. CAUTION: Never attempt to remove a memory card while it is being accessed. Doing so can damage files on the card. Safely remove a card only when the status light next to the slots is not blinking.

Step two: Transfer images without using the HP Photosmart software After inserting the memory card into the HP All-in-One, the memory card appears as a drive on the computer. Follow the steps below to transfer the images on the memory card to the computer.

1. Press the Photo button to display the Photo menu.
2. Press the down arrow button ( ) to select Transfer to computer .
3. Follow the prompts on the computer to complete the transfer of images.
   NOTE: If there are photo files on the memory card that have never been transferred before, a dialog box on the computer asks whether you want to save the photo files to the computer. Click the Transfer option and all the new photos from the memory card are saved to the computer.By default, the image files are saved in month and year folders depending on when the photos were taken. The folders are created under the C:\Documents and Settings\username\My Documents\My Pictures folder.

Yes may be you have not installed any application.But check message folder,contacts in phone memory,the files in gallery,which are located in phone memory,check memory status in file manager.etc If you found delete it or make back up to memory card.Lastly,check the memory card because the inserted memory card might be exceeds to the instructed expandable memory.

If there are sd card error, you cannot format your sd card. you may get messages like

"No SD memory card inserted" messages appears when using digital cameras,
"A media card hard been inserted that contains errors. Do you wish to repair the Media Card now?"
You can read the files on SD memory card, but you cannot write new files or you cannot edit files on SD memory card,
"Access denied", when SD card is corrupted or broken,

... ...

... ...

you can fix sd memory card errors first and them format you sd card.

buy a new one .but next time when u want to format ,connect to pc suite via pc and then select memory card and delete file by file but never delete an instal program otherwise it will be corrupt again.so if u want to delete instal promgram ,go to tool / application manager and delete it from here.

first is try checking its memory terminals maybe their something blocking it or you inserted it in a wrong position.

or try restoring your phone to its factory settings...

 if still nothing happens maybe you have a defective memory card. or to be sure try using other memory card, if still cannot read it theirs a prob in your memory slot internally....

 

hope you solve it...