Anyone using Zyxel Prestige 660HW-T1? I'm using Zyxel Prestige 660HW-T1, my system status can't check the downstream and upstream from the dslam.......... I'm only can know my speed is how fast when doing a speedtest, but can't check my port is assign by how many downstream and upstream from the ISP... I need to check the downstream and upstream status, does this model support the function?

Hi,

In the status window show you the synchro of DSL CPE -two channels.
This information is placed same what the model P-660-HW-D1.

The main diference between D1 and T1, is the Firmware release and the status information -bit rate- of the Ethernet ports.

thanks,

Wy do the signal go inhte each moment?

Hi ,

you can get the value by doing the following

1. telnet to the device
2. select option 24
3. then select option 1
4. look for upstream and downstream values