Need cd for installation

HP Deskejet 3050 Drivers
Visit the above link from HP Official Support. Select the Operating System you have on your PC (e.g. Windows XP OR Windows 7) and install the drivers.

Let me know if any further clarification/ assistance is required.
Hope it helps! Good Luck!
Don't forget to convey your feedback
CreativeTECH

You can download the printer software from this link, so you can install it to your computer

http://support.lexmark.com/index?segment=DOWNLOAD&userlocale=EN_CA&locale=en&productCode=LEXMARK_X4270&page=recommendedDownloads#1

Fiend your solution direct from EPSON. Here is your solution...

http://www.epson.com/printer/prob676ijt65/solution

tiuyaq14

Drivers, Software, lost C.D....come this way!

If you have lost you cd or don't know how to install your printer then all you need to do is download the drivers and software from the manufactures website that suits your operating system and printer.

please follow the link below to download the driver for your printer directly from Lexmark.

For Lexmark http://support.lexmark.com/perl/support/support.cgi?ccs=229:1:0:0:0:0

use the product selector to select your exact model and operating system.

The lexmark site has the drivers! I had the same problem, just go to their support page, and download the drivers/software.

is there any way to download an installation device without the disk of my hp psc 2210 all-in-one? please

You can download the printer driver from HERE.

Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.
If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

Thank you for using FIXYA!

Cheers!
IrishDruid

cant ou access controll panel the select hardware devices let the comp search whilst printer plugged in then a list should come up select the printer in the list tell it you dont have disk then the comp should search for the settings for that printer or if this fails have you tried going onto the makers web site s sometimes you can get this from their fo free hope this is some help to you

drivers on this web site http://www.driverslab.com/drivers/Camera/Logitech/QuickCam_Zoom-Windows_95_98_ME_NT_2000_XP/2663.html