When I turn on my bravia it jumps to hdmi 2 ,I have to use

It's caused by the Bravia Sync feature. It doesn't always connect correctly. When there are issues then attempts to sync up cause the menu to appear.

The solution is to switch off Bravia Sync.

Go in to the TV's set-up menu, and choose HDMI Set-up.
Scroll down the menu list and choose Control for HDMI, then set the menu option to OFF

Let us know if that fixes the problem for you.

Hi Caleb,
To resolve this, please perform the following steps:

• Turn off the TV and unplug the power cord
• Connect the HDMI cable to the HDMI port of your laptop.
• Connect the other end of the HDMI cable to the HDMI input on your HDTV
• Connect your device using the HDMI connector (Refer to image below)

• Plug in the power cords for the TV and Xbox
• Turn on your TV and Xbox
• Enter the TV Menu and select Setup (Refer to the image and steps mentioned below)

• To enter the TV Menu, press the Menu button on Remote control
• Use the left and right buttons (volume buttons) to move between the icons

Select correct input source

• Input allows you to select the proper source based on how you have your TV and video equipment connected.
• Press Input on the remote to go directly to the Input Select menu
• Select HDMI 1 or HDMI 2 (Refer to image below)

If the TV does not work, please follow these steps:

Verify the PIP/POP/PBP function is disabled ( PIP/POP/PBP Compatibility - The only input sources that cannot work together are HDMI with HDMI)

• Press the Menu button on the remote control or TV
• Use the Left and Right arrow buttons (Vol +/-) to select PIP/POP/PBP, and then press <Enter>
• Use the Up and Down arrow buttons (Ch Up/Ch Down) to select PIP/POP/PBP/OFF
• Use the Left and Right arrow buttons to select Off

If issue is still persists, please move to the next step

Reset the TV current input to its default configuration

• Press the Menu button on the remote control or TV
• Use the left and right arrow buttons to select Setup, and then press Enter/OK
• Use the Up and Down arrow buttons to select Factory Reset, and then press Enter/OK
• Select Current Input Setting and press Enter/OK
• Re-check the TV functionality

1. Turn off the TV and unplug all the HDMI connections to the TV.
2. Turn on the TV and while holding down the up arrow on the remote control, press the power button.
3. The TV will turn itself off, then back on again then release the up arrow button
4. Complete the initial TV setup wizard
5. Turn off the TV and plug back in all the HDMI cables.
6. Check to see if the inputs are working.
Hope this helps.

"Bravia Screen". Not sure what you mean. Is it in maintenance mode?

Option 1.. With the tv plugged in and the power OFF (this is called standby mode) take your remote (make sure it has fresh batteries) follow this sequence on the remote. You have to press the buttons within a second of each other in this order:

DISPLAY - 5 - VOLUME + TV POWER.

When the screen comes on hit JUMP right away and it puts you into a little screen for maintenance. Simply turn off the television to exit maintenance mode.

2. If your remote is bad, ie, new batteries don't fix it, might suggest a new one.

3. If you can't get a new remote, power on the television using the power button and then hit the menu button. Use the up and down keys to see if you are stuck in some weird screen or something.

4. If you are connecting something to the television (like a dvd, a playstation, computer, etc) try unplugging everything and test each port individually, using the side buttons as described in part 3 to change the input mode to the port you are using.

Hope this helps

Samsung TV's have Anynet automatic input switching. This severely conflicts with the Harmony Remote as they both do the same jobs; Switch inputs automatically. We would like for you to disable this feature on your Samsung TV using your original remote, so the Harmony Remote will work properly.

Disable Samsung Anynet+

1. Press your Tools Button.
2. Scroll down to Anynet and press your Select Button.
3. Once on the Anynet screen, please press your Left/Right Button(s) to select the Off Setting on the Anynet+ (HDMI-CEC)
4. Scroll down to the Auto Turn Off and select No.

Once this is completed, please turn off your TV and all device and power them back on using the Harmony Remote.

Make sure you change the input that the cable is coming in on, If you was watching in HD mode then you was using an HDMI or compontet hook up.Look on tv remote for Video input button to select the componet input 1 or 2 or HDMI inputs which it is connected to. Look for a button on the remote called TV/VIDEO or INPUT

Model 20-NT

1. Using the remote control, key in the following: Setup, Stop, Skip Backwards, Skip Forwards.
2. You should then be able to change region and remove MacroVision.

Turn on the DVD player without DVD inserted. Then, using the remote control, press this buttons: Setup, Stop, Skip Backwards, Skip Forwards.


Model 22NG

Turn on your player
Open the tray
Press 8 4 2 1 on the remote control --> "Region 2" appears on the TV screen
Press SELECT until 9 for region free & MacroVision free

Model 32S


Press Setup
press Volume +
Press Volume -
Press the right arrow until the screen on the player reads 255
Press setup to exit and all done

Remove disk from teh disk tray and try Setup after that.

Try pressing the HDMI button on your remote a couple of times, pause about 5seconds after each press it might be slow to change. If this doesn't work try connecting just the yellow lead(composite video) into the DVD player to the TV like the old days, probably AV1 or AV2 in the back of the TV. Then access the setup menu(setup button on remote). This will bring up a menu. Use the down arrow on the remote until HDMI setup is highlighted. You should then get a selection to turn HDMI on and select the different outputs(576, 720p, or 1080i). You might actually find the picture to be worse on some DVDs.

You may want to try a Manufacture reset. To do this you must first turn the TV off. Press in sequence.. Display-->5-->Vol +-->power on your remote(this sequence must be done fast). This should bring up a service menu. Press the number 8 and then Enter on you remote, The set should go off and on by itself. Now go through your setup and try the input again.

Best regards
Circuitcity