Middle light blinking message says paper

What this light sequence means that the printer has a paper jam.

When a paper jam occurs, the printer stops and the operator panel's Paper Jam light and Continue button lights come on. Press and release Continue twice quickly to display the specific secondary error paper jam light sequence.

How to clear Paper Jam

?· Press Continue button twice quickly to see the secondary error code.

To get the secondary error codes

?· When the Error light (!) and Continue button lights are both on, a secondary error has occurred.

?· When the Paper Jam light (4th light) and Continue button lights are both on, a paper jam secondary error has occurred.

?· Press and release Continue button twice quickly to display the secondary error code light sequence.

Press Continue button to resume printing once all the jammed pages are cleared from the paper path.

We recommend that you clear the entire paper path when a paper jam occurs.

To clear a paper jam:

1 If you are feeding paper from a tray, remove the tray, and then remove any jams.

2 Open the front cover and remove the print cartridge assembly.

NOTE: Do not leave the print cartridge assembly exposed to direct light for an Extended period of time. Extended light exposure can cause print quality problems.

3 Remove any jams in the area behind the print cartridge assembly.

4 Lift the flap at the front of the printer and remove any jams beneath the flap.

5 Open the rear exit and remove any jams.

6 After you have cleared the jams, reinstall the print cartridge assembly, make sure all printer covers and trays are closed, and then press Continue button to resume printing.

NOTE: The printer reprints the pages that caused the paper jam.

canon printer. remove all traces of paper in the paper path. remove the power plug and replace after about 30 seconds. restart the machine and clear the orange button.

HI I HAVE A DESIGNJET 1050C PLUS WHIT ERROR 0B0007

1. Turn off the printer.
2. Remove any paper trays. Inspect them for wrinkled or damaged paper.
3. Also open the back cover of the printer if this model has one.
4. Open any other doors that give access to the printer's paper path and to the toner or ink cartridge.
5. If necessary, remove the toner or ink cartridge. Place it away from light/ sun light to avoid damaging it.
6. If you find a piece of jammed paper, remove it by holding it with both hands and pulling firmly. The goal is to keep the paper from tearing. If several pieces are jammed together, try pulling out the middle piece first to loosen the jam.
7. If the paper does tear, try rotating the roller gears manually to free the paper. Don't force anything, though. Do this step especially if the jam message comes up repeatedly without any obvious paper jam, there may be a small tear of paper inside.
8. Ones the printer is free of paper Replace the toner or ink cartridge and paper trays, close any doors you opened and turn the printer back on.
9. If the printer paper jam message still appears, then there is still some paper in the printer. Reinspect the paper path.
10. see alternative if the problem is still not solved.
    

alternative :
Load a piece of thick paper, for example photo paper and press the resume button (may be diffrent button on diffrent models) a few times to the printer picks up the paper and puts it through the machine.

give this a shot
try this, its probably a small part of jammed paper or then theres a problem with the pickup, try cleaning it.

1. Turn off the printer.
2. Remove any paper trays. Inspect them for wrinkled or damaged paper.
3. Also open the back cover of the printer if this model has one.
4. Open any other doors that give access to the printer's paper path and to the toner or ink cartridge.
5. If necessary, remove the toner or ink cartridge. Place it away from light/ sun light to avoid damaging it.
6. If you find a piece of jammed paper, remove it by holding it with both hands and pulling firmly. The goal is to keep the paper from tearing. If several pieces are jammed together, try pulling out the middle piece first to loosen the jam.
7. If the paper does tear, try rotating the roller gears manually to free the paper. Don't force anything, though. Do this step especially if the jam message comes up repeatedly without any obvious paper jam, there may be a small tear of paper inside.
8. Ones the printer is free of paper Replace the toner or ink cartridge and paper trays, close any doors you opened and turn the printer back on.
9. If the printer paper jam message still appears, then there is still some paper in the printer. Reinspect the paper path.
10. see alternative if the problem is still not solved.
    

alternative :
Load a piece of thick paper, for example photo paper and press the resume button (may be diffrent button on diffrent models) a few times to the printer picks up the paper and puts it through the machine.

1. Turn off the printer.
2. Remove any paper trays. Inspect them for wrinkled or damaged paper.
3. Also open the back cover of the printer if this model has one.
4. Open any other doors that give access to the printer's paper path and to the toner or ink cartridge.
5. If necessary, remove the toner or ink cartridge. Place it away from light/ sun light to avoid damaging it.
6. If you find a piece of jammed paper, remove it by holding it with both hands and pulling firmly. The goal is to keep the paper from tearing. If several pieces are jammed together, try pulling out the middle piece first to loosen the jam.
7. If the paper does tear, try rotating the roller gears manually to free the paper. Don't force anything, though. Do this step especially if the jam message comes up repeatedly without any obvious paper jam, there may be a small tear of paper inside.
8. Ones the printer is free of paper Replace the toner or ink cartridge and paper trays, close any doors you opened and turn the printer back on.
9. If the printer paper jam message still appears, then there is still some paper in the printer. Reinspect the paper path.
10. see alternative if the problem is still not solved.
    

alternative :
Load a piece of thick paper, for example photo paper and press the resume button (may be diffrent button on diffrent models) a few times to the printer picks up the paper and puts it through the machine.

I found this on the HP support site:

The power light is on, and the resume light is blinking.

The printer might be waiting to complete a print job or to receive data from your computer.

Solution

Wait for the printer to finish the current task. The printer is waiting for the ink to dry on freshly printed paper.

Solution

1. Remove the paper with fresh ink.
2. Press the resume button.

The printer might be out of paper.

Solution

1. Load paper in the paper tray.
2. Press the resume button.

The printer might have a paper jam.

Solution

Clear the paper jam. If the resume light continues to blink after the paper jam is cleared,

OR

if the print carriage is stuck or making a grinding noise, then follow these steps.

Solution

1. Lift the top cover of the printer.
2. Turn the printer off and then on again.
3. Unplug the power cable from the back of the printer when the grinding noise starts. Unplug the power cable from the wall outlet.
4. Movethe print carriage toward the middle of the printer (this proceduremight take a couple of tries to get the timing correct).
5. Remove the print cartridges and close the top cover.
6. Plug the power cord into the back of the printer. Plug the power cord into the wall outlet.
7. Open the top cover, reinstall the print cartridges, and then close the top cover.

The printer may be ready to eject banner paper.

Solution

Press the resume button to eject the banner paper.

try this

1. Turn off the printer.
2. Remove any paper trays. Inspect them for wrinkled or damaged paper.
3. Also open the back cover of the printer if this model has one.
4. Open any other doors that give access to the printer's paper path and to the toner or ink cartridge.
5. If necessary, remove the toner or ink cartridge. Place it away from light/ sun light to avoid damaging it.
6. If you find a piece of jammed paper, remove it by holding it with both hands and pulling firmly. The goal is to keep the paper from tearing. If several pieces are jammed together, try pulling out the middle piece first to loosen the jam.
7. If the paper does tear, try rotating the roller gears manually to free the paper. Don't force anything, though. Do this step especially if the jam message comes up repeatedly without any obvious paper jam, there may be a small tear of paper inside.
8. Ones the printer is free of paper Replace the toner or ink cartridge and paper trays, close any doors you opened and turn the printer back on.
9. If the printer paper jam message still appears, then there is still some paper in the printer. Reinspect the paper path.
10. see alternative if the problem is still not solved.
    

alternative :
Load a piece of thick paper, for example photo paper and press the resume button (may be diffrent button on diffrent models) a few times to the printer picks up the paper and puts it through the machine.

hey, give this a try:

1. Turn off the printer.
2. Remove any paper trays. Inspect them for wrinkled or damaged paper.
3. Also open the back cover of the printer if this model has one.
4. Open any other doors that give access to the printer's paper path and to the toner or ink cartridge.
5. If necessary, remove the toner or ink cartridge. Place it away from light/ sun light to avoid damaging it.
6. If you find a piece of jammed paper, remove it by holding it with both hands and pulling firmly. The goal is to keep the paper from tearing. If several pieces are jammed together, try pulling out the middle piece first to loosen the jam.
7. If the paper does tear, try rotating the roller gears manually to free the paper. Don't force anything, though. Do this step especially if the jam message comes up repeatedly without any obvious paper jam, there may be a small tear of paper inside.
8. Ones the printer is free of paper Replace the toner or ink cartridge and paper trays, close any doors you opened and turn the printer back on.
9. If the printer paper jam message still appears, then there is still some paper in the printer. Reinspect the paper path.
10. see alternative if the problem is still not solved.
    

alternative :
Load a piece of thick paper, for example photo paper and press the resume button (may be diffrent button on diffrent models) a few times to the printer picks up the paper and puts it through the machine.

Requires new rollers