Where is the filter on my Brada Front load washer Model# BFW36W/XAC?

Barry Coates

• 3463 Answers
• Posted on Dec 12, 2009

SOURCE: Locating the filter on the Hotpoint WMA54 front load washer

To check and clean the filter, you need to remove the lower rear panel of washer.
Locate and remove the large black hose fastened to bottom of drum.
Remove and clean filter inside hose.
Remove hose onto pump, and check for obstruction or blockage here and in the pump as well.
Hope this helps to solve your question.
Please leave feedback.
Thanks.

Testimonial: "Spot-on advice ticked all the boxes. Problem appears to have been resolved!"

SOURCE: LG front load washer OE error. cleaned filter need

The LG error code OE simply means "the pump is blocked". Presumably the water isn't being emptied properly. As with all error codes it is possible that there is a cause other than the exact description in the error code explanation but basically this error means as far as the washing machine is concerned it thinks the water isn't pumping out. A pump, or filter blockage is the most common cause but it could be caused by other faults such as a faulty pump, or even a blockage in the drain hose or somewhere else in the system etc.


LG themselves have some information on this error code..

http://lgknowledgebase.com/kb/index.php?View=entry&EntryID=6273

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.!!!!!!!!!!

SOURCE: Brada TM Modele BBF21KASB/XAC

Hi,

Here is a tip that will help you to get better results from your question on Fixya.

How to ask a question on FixYa

heatman101

SOURCE: I have a frigidaire front load washer model

My front load washer won't spin fast

SOURCE: There is a strong odor

run a empty load, and add a cup of white vinegar , that should flush out any bad odor thats in the machine itself