Question about Radio Communications

1 Answer

Had radio on volume set to 29 and when i turned volume up to 30 it shut off and wont turn back on

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

You likely tripped a fuse or circuit breaker. If you are referring to an automotive type stereo there will be 2 fuses associated with this problem. One is directly on the back of the head unit and is usually 10amp, the other is in your vehicle fuse box usually labeled radio in the diagram.

Posted on Feb 17, 2020

Ad

5 Suggested Answers

StuartB

Stuart

  • 807 Answers

SOURCE: radio shuts off at volume of 16 or more

Maybe a protection component cutting in.
If you have speakers that are too powerful for the radio it may shut down to protect the amplifier from overdriving the speakers. That produces too much heat in the amp chips/transistors and they either have a overload cut out protection circuit or they burn out.
Even if the speakers are the stock fitted ones the wattage could be bigger than the amp in the radio can handle.
There's probably no way of knowing how powerful the speakers in the truck are but you could try the radio with another set.
Max 50 Watts for that radio. If you don't have the manual for it, it's available here:
http://www.kenwoodusa.com/Support/Car_Entertainment_Owners_Manuals/#_

Posted on Mar 07, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: sound volume

when i turn up the music to lould it shut off please say you can help me

Posted on Aug 07, 2008

Anonymous

  • 55 Answers

SOURCE: when volume is turned up the radio shuts off

Have you checked all of the connections on the speakers, stereo, etc. Being a marine CD player, the wires and connectors are exposed to more elements than a car CD unit. Check for corrosion and make sure that all the speakers are hooked up to the correct "+" and "-" terminals. Not sure if this will help, but thought I'd try. It does sound like a speaker connection problem.

Posted on Aug 30, 2008

LVT7857

Larry Tezekjian

  • 117 Answers

SOURCE: Kenwood new sterio shuts off when turning up volume

You may have a short in a speaker. Check to see that the wire terminals on the speaker itself aren't touching any metal. Even 1 terminal touching metal will cause issues. Hope this helps.

Larry T
Winona Lake, IN
http://www.cybersoundsaudio.com/cybersounds/vehiclepics.html

Posted on Jan 28, 2009

Anonymous

  • 305 Answers

SOURCE: I have cobra 29 ltd has power going into radio but

remove the outer casing, there is a glass fuse..( 1.5 amp )....it has probably blown

Posted on Jul 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

AM FM radio Compact Disc player o.k. for 30 sec after start, then nothing. Fuses o.k.


Maybe a shorted speaker causing the power amplifier inside the radio to shut down or a speaker wire shorted to chassis and last the internal amplifier of the radio cd set faulty by itself... set volume to zero power it off take out the radio cd set; remove the speaker iso plug leaving the power plug only in and power it on if necesary turn again the volume down to zero and wait if it keeps turned on it a speaker problem if it shut itself off again then you go for a repair or a new one

Apr 23, 2016 | 2002 Toyota RAV4

1 Answer

Why wont my i rulu tablet wont unlock or power off ?


This might fix your problem

Every Android handheld has the same pattern on how to restore or reset the phone back to factory settings. Factory settings means you are wiping the data in the internal storage but not whats on the SD card. See steps below: 1. Turn off the tablet by pressing and holding the power for 30 seconds and tap shut down. 2. Press and hold power plus volume up until an android menu appear 3. Use the volume keys to navigate and option key or power to select. 4. look for factory reset and wipe data 5. restart the device and it should be back to factory settings.

Jun 19, 2014 | Computers & Internet

1 Answer

Receiving volume is very low, I have to turn the volume up all the way to hear anything (squelch is very low when I turned knob to readjust settings) when before I didn't even need to turn it up halfway to...


was the radio wired direct or with a cigarette lighter plug? try the RF gain knob and the mic gain knob.If they are wide open does the radio rec.any better? if not you may have a problem with the main IC

Jan 04, 2014 | Cobra 29 LTD CB Radio

1 Answer

What is a voic box on a cobra 29 ltd? What is a good antt combo four a 29 ltd?


Cobra's LTD 29 model Citizen's Band radio features the full 40 channels allowed and a heavy-duty microphone. The radio provides 4 watts of AM radio frequency output with a switchable automatic noise limiter and noise blanker. Other features include Cobra's Delta-Tune function. Making a Cobra LTD 29 hear and receive better involves making changes to the radio's settings, including the settings specific to this brand.
M/F Turn the switch labeled "NB/ANL, ANL, OFF" to the "ANL" position and try the transmission again if noise is affecting reception. "ANL" is an automatic noise limiter function and reduces noise caused by the vehicle's electrical systems and electronics.

M/F Switch to "NB/ANL" to activate the noise blanker, which may also reduce noise if you continue to have problems. It's an RF noise filtration function and will help with ignition noise.

M/F Adjust the "RF Gain" knob by turning it clockwise to increase gain in weak signal areas if you have problems hearing radio traffic.

M/F Set the "Delta-Tune" function to capture a more listenable signal and get rid of adjacent channel noise. Rotate the knob labeled "Deltatune" to the center position for best tuning. Try micro-adjustments to the left or right as well.

M/F Turn the volume up if you still can't hear and as with any CB radio, adjust the squelch if the radio is noisy when there's no traffic. Turn the knob labeled "Squelch" all the way to the left to receive all signals, including noise and turn the control clockwise until the background noise stops. You will be able to hear the strongest transmissions without having to listen to weak signals and noise.
The service manual can be found here

Jan 23, 2013 | Lands Phones

1 Answer

How do I set the clock on my Pioneer DEH-P6200 cd receiver?


With the vehicle on, turn OFF the radio. Next, Press the Volume and hold the VOLUME knob. You should see LANGUAGE on the display. Scroll the VOLUME knob until you see CLOCK SET. Pres the VOLUME knob and the HOUR will start flashing. Scroll the VOLUME knob to set the hour then Press it to set the Minutes. When you're finished. Turn off the radio, then turn it back on. When the radio is in use, the Radio Station will scroll on the display, then the Artist information, then after a few seconds (20-30), the Clock will display.

Jan 14, 2011 | Pioneer DEH-P6200 CD Player

1 Answer

Low volume output from radio. appears to transmit and receive properly


Hi, my name is John. Welcome to FixYa. Turn your volume up to MAX, then turn your RF GAIN to MAX. If same, plug in a external speaker in back of radio into the external speaker jack. see what happens. If loud, re-place the speaker in the radio. Let me know how it goes, glad to help you and thanks for choosing FixYa....John

Oct 31, 2010 | Cobra 29 WX NW ST 40-Channels Base CB...

1 Answer

2007 Saturn Ion radio will not turn on. At first, no volume so I shut the vehicle off and back on and it appeared okay. The radio never turned on the next time I started the vehicle. I checked all three...


I have a 2006 saturn ion and the radio wont turn on...there is a picture of a phone on my radio display and when you turn the vol up to 20 or so there is a buzzing sound any ideas

Oct 25, 2009 | 2007 Saturn ION-2 Quad Coupe

1 Answer

Radio continues to fade in and out, plays for awhile fades out


Need more information on this if possible.

It may be the speed volume is enabled on your radio, does it fade out when you start to come to a stop? Some vehicles have a speed volume setting in their radios in which the radio raises and lowers the volume during driving conditions, like when your comming to a stop, the volume will automatically lower and during faster driving speeds will rise to a higher volume.

Hope this helps
JD

Sep 10, 2009 | 2001 BMW 325

1 Answer

Blaupunkt 520, 100% full volume on start up


With me. I pressed the + volume button once from 13 to 14 and it went all the way to 30 ( highest volume) and wont go back down. it also wont let me go to the radio now

Apr 04, 2009 | Blaupunkt PCA250 Car Audio Amplifier

6 Answers

Sound volume


hi there are 2 options for this: 1) if its a anlog knob then the AMP inside is gone bad... 2) if its a digital knob then it is preesed constantly and there for raising the volume level try disassemble the system and making the spring knob more efective good luck

Dec 28, 2005 | RCA RS2652 Shelf System

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

Anthony Ward
Anthony Ward

Level 2 Expert

397 Answers

Brad Brown

Level 3 Expert

18165 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...