Purchase 2 extra handset vtech from different home base the phone out of range or no pwr at base

Page 6 (pagina seis) :

https://cdn-media.vtechphones.com/products/CS/CS6114/CS6114-X_WEBCIB_V9_20170328.pdf

When the handset is out of range, the handset displays Out of range or no pwr at base. If there is a call while the handset is out of range, it may not ring, or if it does ring, the call may not connect well when you press . Move closer to the telephone base, then press to answer the call. If the handset moves out of range during a telephone conversation, there may be interference. To improve reception, move closer to the telephone base.

Cuando el telefono est? fuera de alcance, el
el auricular muestra Fuera de rango o no
pwr en la base.
Si hay una llamada mientras el telefono esta fuera
de rango, puede que no suene, o si suena,
la llamada puede no conectarse bien cuando
prensa . Acercate al telefono
base, luego presione para contestar la llamada.
Si el telefono se mueve fuera del alcance durante
una conversacion telefonica, puede haber
interferencia. Para mejorar la recepcion, muevase
mas cerca de la base del telefono.

Out of range OR No power at base is shown in the handset ...

www.vtechphones.com/support/.../353

VTech Communications Inc.Out of range OR No power at base is shown in the handset display window. Why don't ... Tip 1 of 5. Confirm proper installation of the telephone base and charger power adapters, and handset battery. You should only use the VTech power adapters provided with your telephone. ... Next Tip This solved my problem. Tip 2 of 5.

FAQs - VTech Communications

www.vtechphones.com/.../frequently-asked-...

VTech Communications Inc.Have a question about VTech cordless phones? Visit our ... How do I find my model number ... My battery pack does not last very long between charges.

VTech CS6429-4 DECT 6.0 Expandable Cordless Phone ...

Sounds like your rechargeable batteries have reached there usefulness.

Is the base unit being powered up? Is the adapter that plugs into it working and supplying power to the base? If not nada will work and you will get the out of range indication on remote handsets.

Plug the base unit into the mains and connect the phone socket!

If there is that message and you are close to the base AND the light and phone appears good, then the issue is the transmitter power in the handset.

Periodically, while using my Vtech Model CS6328-3 phone, it becomes virtually impossible to hear the other party - interestingly, it affects other non-cordless phones in the home at the same time. Just like that, the volume may come back. The person on the other end sometimes has the same proble hearing me - but not always. Have switched back to a previous Panasonic phone system in the interim, no problems. Seems to be the Vtech system. Any thoughts?

menu
*7890#
Test handset
select
arrow down to "Next Page..."
select
Regstr Clear
select
select again (Reg Clear ?)

You get "OK"

Off
Off (you're backing out of the whole menu)
Off
Off (You now get "Out of range or no pwr at base"

Pull the battery
Replace the battery
(you now have an unregistered handset)

Thank you, this worked for me and I can now register my old handsets from my lightning struck base to my new base, (of a different model, but it still works.)

Have strangely got the same problem - about the same time you posted this, but intermitently. I have isolated that the problem is in fact the handset itself, not the base unit. I eliminated a problem with the base unit by a) registering a different DECT phone to it. - The base still works fine. b) Leaving the handset switched off for an hour or so (press and hold the "OK" botton to switch off / on); then whislt it was working, registering the handset to a different base (Base 2). And guess what, after 30 mins the "BASE 2" message started flashing on the faulty handset.
So, if you already have an A110 extension handset, make sure it's also registered to base 1 and maybe try to get just the handset repaired via VTECH. (or just buy a new handset if they are available).