Tascam 2488 A caution notice has come up which reads:Sorry, an error is occured. Start the auto repair program. Press No/Exit. But the unit is frozen and nothing is functioning. Please help,Ray.

Page 3 of the manual says it does.

Batteries (battery pack or batteries installed) should not be exposed to excessive heat such as sunshine, fire or the like.

https://tascam.com/downloads/tascam/4/E_2488neo_web.pdf

The unit is discontinued which is never a good sign.

https://tascam.com/us/product/2488neo/feature

.

https://tascam.com/downloads/tascam/353/2488_1.00Messages.pdf

I don't see any mention of an "Auto repair program" in the manual.

Tascam has a great website with FAQs and manuals links.

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_aad3edb7dfa380b9

alors c'est quoi la solution car moi pareil !!!

Re: Tascam 2488Hold down the 'SHIFT' button, and press the 'Tuner' button to get the tuner on screen. Press 'Home' to exit the tuner

Straight out of a Tascam 2488 manual...

When editing tracks, you have selected the
same track as both source and destination
for a duplicate operation.

Press EXIT and try again.

I think if you had the manual you would know the answer.

Register and download the manual for free at audio.manualsonline.com

Search for "Tascam Portastudio 2488"

http://music.manualsonline.com/manuals/mfg/tascam/2488neo.html Page 118... Press NO/EXIT and check the digital audio source. The output should be 44.1 kHz (note that some players output 48 kHz). A unit with varispeed (pitch control) may have varispeed turned on, altering the sampling frequency from 44.1 kHz.

Jose

I had the same problem. I sent it back to my place of purchase and they sent it to an authorised Tascam repairer. Unfortunately they sent it back twice saying it was fixed when it wasn't. They then decided it needed a ne main board which was going to cost $800 AUS, excluding any labour to install it. In the end I got angry and went straight to the TASCAM distributor and told them my problem and that it was unnaceptable that such an expensive unit needs a new main board in such a short space of time. To my surprise they came back and agreed to replce the main board for fee and the service repair centre did not charge me either. DON'T pay for this. It is obviously some problem with the unit. RING TASCAM in your area or the authorised distributor.

Hope this helps.

Link to Tascam 2488 documents page:
http://tascam.com/Products/2488_downloads.html

Individual Items as Listed:

Link to the Tascam 2488 product brochure:
http://tascam.com/Products/2488/2488_bro.pdf

Link to the Tascam 2488 application guide:
http://tascam.com/Products/2488/2488_AppGuide.pdf

Here's the link to the Tascam 2488 quick start guide:
http://tascam.com/Products/2488/2488_quickstart.pdf

Link to the updated Tascam 2488 manual:
http://www.tascamcontractor.com/ftp_resour...w_additions.pdf

Link to the Tascam 2488 manual additions:
http://www.tascamcontractor.com/ftp_resour...e_additions.pdf

Link to the Tascam 2488 MIDI Parameter Mapping
http://www.tascamcontractor.com/ftp_resour...ontrol_v0.2.pdf

Link to TASCAM 2488 Hi-Res images:
http://www.tascamcontractor.com/ftp_resour...488_images.html