You need to clear that error from service mode first , after clear if problem replace the fixing unit
SOURCE: canon IR 2200 error code E000002-0000
It's to do with the fixing unit (hot bit) left hand side. Make sure theres no paper **** any where near it. If so switch off then on.
If not it looks like there may be a fault with the fixing film or may just need the error resetting in service mode.
SOURCE: Protection displayed and shuts off
I had a similar problem and managed to fix it. It is not necessarily your case, but in mine the output filter capacitor in the central speaker channel got broken - it had a crack on its body. Replacement of the capacitor fixed the shutdown on protection.
Another question is what damaged the cap. It could be just a bad device or there was something overlooked during development of the home theater. Preliminary I consider placement of the capacitors as a possible problem - they are too close to the output inductors which can get relatively hot even at normal working condition. Anyway you can look at my solution - I posted it: http://craftsman-hambs.blogspot.com/2009/09/samsung-home-theater-ht-x40-shut-down.html
SOURCE: canon ir 400 photocopier
i have ir400 in my machine. first e805 code has been displayed and after that it shows that to load paper. then after e803 code is displayed. please help
60 views
Usually answered in minutes!
×