Instruction manual for tagital T1 watch - Watches

Casio MTGM900DA-8 G-Shock download instruction manual pdf

https://mans.io > Casio > G-Shock
Casio MTGM900DA-8 Watches G-Shock download pdf instruction manual and user guide.

Casio G-Shock Instruction Manual Directory by Model Name

https://www.g-central.com > casio-g-shock-instruction-...
Download Casio G-Shock instruction manuals by model and module number in PDF format. ... All instruction manuals are hosted and located at Casio.com.

MTGM900DA-8 ' G-SHOCK MT-G Silver - CASIO

https://www.casio.com > ... > G-SHOCK
Silver stainless steel band digital watch with neutral face.

• 
  

  Timepieces(Watches) ' Manuals - Support - CASIO

  https://support.casio.com > manual > manualsearch
  Manuals. Operation Guide (HTML) · Operation Guide (PDF).

I could not locate a manual, but the suggested answers shown with your question from other FIXYA questions might help.

Example:

http://www.fixya.com/support/t1777612-set_columbia_cl_5009_display_t2_want

Can set columbia CL 5009 Display is on T2 want T1

You have to hold down B to set up T1 which is the time the hands will display. Once you see the City and T1 show up on the digital display you can go through the various settings to set time/date etc. Use B to cycle through setup and A to make the necessary changes.

Pushing the crown allows you to set up T2 or the time displayed on the digital section. You set this by choosing the time zone.

Hope this helps

There is two times possible in this watch ADP6016.
• Those times are named T1 and T2.
• IMPORTANT: When your displayed time is T2, you CAN NOT set the time but just set the offset of T2 relative to T1.
• You can see which time is displayed by looking for a very little T1 or T2 written just above the seconds
• To swap the displayed time from T2 to T1 (or contrary), you have to long press the start/stop button (top right white button)
• When your displayed time is T1, you CAN set the time with the solution given by soulgirljen
just before this one

You are right the manual is useless.

To set the watch it needs to be in T1 setting, you can do this by using the C (top right) button, to chose just push once and the number should change, hold to set it to T1.

After that, push the A button (top left), this should hopefully display 'Light'. If it still displays 'Offset' then you are still in T2 (offset lets you offset the GMT). Try the C steps again.

Once 'light' appears you can scroll through the menu using B (bottom left), at which point you should find the time selection option. It should be flasing, use the two far right up and down buttons to then set the time/date etc. Press B to move on to the next setting. When you are done press A.

ok ,here it is .
Instructions To Set The Time On The Diesel DZ7071 Watch

Ok the first and most important thing to know about this watch is that it has an unusual timezone function (unusual to me at least). This allows the watch to display two different times. Time 1 (or T1) is the primary time (the time of the place where you spend most of your time!). The time can only be adjusted whilst the watch is in the T1 mode (T1 should be displayed in the bottom left corner of the screen). Holding down the top right button for one or two seconds will temporarily replace the current T1 time with the T2 time. Holding down this same button for several seconds will toggle the current time mode to T2 and the watch will continue to function in the second time zone until you toggle it back to T1.

The second most important thing to know is that you can only set the time whilst in the T1 mode. When in T1 mode hold down the top left button until the watch enters the settings menu (it should say "Light" at the top of the screen) now use the bottom left button to toggle through the settings menu until you get to the time settings. I think this part of the process if sufficiently straight forward so I'm not going to go into more details here, all I'll add is that once you have the watch set to the desired time mode 12h/24h time and date you just need to press the top left button to save the settings and return to the main time screen.

To set a secondary timezone time you have to first toggle the watch to the secondary time zone mode (hold the top right button for several seconds and the T1 indicator should change to T2 (and the watch will now be displaying the time that is currently set for the secondary timezone). This time is based on the primary time by simply telling the watch a number of whole hours ahead or behind the primary time. To adjust this hold down the top left button for several seconds, the watch will then say "offset" now use the buttons on the right to add or subtract hours from the primary time. Once set press the top left button again to return to the main time screen. Finally hold down the top right button for several seconds once more to return the watch to the T1 mode.

Try holding the st/st button while on time display

Put off all digital disply - pull out middle winder.

The watch keeps 2 different times. Make sure you are in T1 (look at lower left corner). If it's in T2, change to T1 by holding C button. To change time, hold B button until the watch is flashing. Press A button to go through different settings. Use C and D button to change values.

Alright, so the actual solution probably revolves around the fact you are stuck on "T2" time mode. This is found by a symbol that reads either "T1" or "T2" directly above the seconds. So first make sure you are in "T1" by holding the ST/SP button first, then holding the SET button second and simultaneously. After holding both for a couple seconds, the mode will switch from either T1 to T2 or T2 to T1. Once you get the T1 to be selected, you can then press and hold the SET button. Once that is held long enough, a menu will pop up saying "Chime" as the first display. Press the Mode button to start displaying the other features, such as hour, minute, second, month, date, etc. To make changes within a selection use the ST/SP and RESET as up and down changes. When you are all done and back to the Chime feature, you can press SET to exit out of the menu.

As a side note, the T2 function is based off your T1 time, so if you are in a different time zone, you can offset the time by however many hours you off from the T1 time - but the key is to get the T1 time set first.

Hope this helps.