How do. I reset a yaleseries 150/30 padlock - Locks & Locksmithing

The padlock symbol on your Hoover washing machine indicates that the child lock feature is activated. This feature is designed to prevent children from accidentally starting the machine or changing the cycle during operation. If the padlock symbol is displayed but the padlock is not locked, it's possible that there's a malfunction with the child lock system.
To resolve this issue, try pressing and holding the "Start/Pause" button for several seconds until the padlock symbol disappears. If this doesn't work, try unplugging the machine from the power source for a few minutes and then plugging it back in. This may reset the machine and allow you to deactivate the child lock.
If neither of these solutions work, consult the user manual or contact Hoover customer service for further assistance.

How do i reset the code on an ABUS 145 series combination padlock

1. Using the existing code, unlock the padlock.
2. Rotate the unlocked shackle 180 degrees and then press it down.
3. While the unlocked shackle is depressed manipulate the code wheels to the desired code.
4. Release the shackle and rotate back 180 degrees.

https://www.lsc.com.au/Products/Padlocks-Hasps-Chain/Padlocks-Accessories/Combination/ABUS-165-Series-Wheel-Combination/16540C.html

Many monitors have an on-screen display lock (the padlock icon) that seems to get stuck.
Various suggestions in the links below - the one that seems to work most often is to hold the monitor's menu button down for 15-20 seconds to get the screen menu, then either try unlocking the OSD (On Screen Display) or do a factory reset on the monitor.
http://www.fixya.com/support/t448684-flashing_padlock_icon_in_middle_screen
http://www.paulstravelpictures.com/Dell-LCD-Monitor-Flashing-Padlock-Icon/index.htm
Different monitors have slightly different menus, but if it's a Dell monitor you can find the manual below (under Display):
http://support.dell.com/support/systemsinfo/documentation.aspx?c=us&cs=19&l=en&s=dhs&~cat=3

this step by step guide should help you reset the lock, if its not the exact same lock, its the closest thing that Yale currently makes. Be aware you cannot reset locks like these unless they are open already, atleast not to my knowledge

Combination Cable lock Reset the combination of Yale travel lock Secure...

Try a system reset using a pin.

the lock combination is not working anymore, I can not open the lock, how I can reset the new combination

unplug for 40 minutes to attempt reset. If not - the ECU must be replaced.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

I have an FDB1502RGB0 model but had the same problem. I reset the circuit breaker and its working fine now. I'm not sure what caused the problem but it seems to be fine now.