Krups 618050 won't turn off,,it keeps heating even after I press the button and turn it off...Any suggestions

If your Krups EA829810/70L-2317 coffee machine is not responding when you press the power button, there are several possible causes for this issue:

1. Power supply: Check to make sure that the coffee machine is properly connected to a power source and that the power outlet is working. You can test the outlet by plugging in another device to see if it works.
2. Fuse: If the coffee machine is connected to a power source and still not turning on, there may be an issue with the internal fuse. You can try replacing the fuse to see if that resolves the issue.
3. Power button: It is possible that the power button itself is damaged or malfunctioning, preventing the machine from turning on. You can try cleaning the power button or contacting Krups technical support for further assistance.
4. Internal components: If none of the above solutions work, there may be an issue with one of the coffee machine's internal components, such as the circuit board or motor. In this case, it is recommended that you contact Krups technical support or a certified repair technician for assistance in diagnosing and repairing the issue.

I hope this helps!

No thermoblock heating. Here is broken two thermo fuses on the thermoblock.

It may just need to have the liquid quantity reprogrammed if it is a model with such a feature. Set it up as normal and press the button that causes it to make the coffee, do not release the button, keep it pressed until the desired quantity is delivered and then release it. If it is like most of the ones I have worked on the next time you press and then release the button it should continue to flow through the same quantity as you just programmed it to.

I have one. there is a setting on how many cup you want 4,6,8,10, or 12 cups

in the machine there is small circuit board that control the machine so they programmed that circuit to preheat the heating element for about 30s if this failed the red light flashes two tims then stops so you have to change the circuit board

My Krups Nespresso XN2005 machine turns itself off when I try press the start button- any solutions ?

Check to see if your heating plate gets hot when it is on, if it doesn't your water heater/heating pklate has failed.

It sounds like the temperature sensor has malfunctioned. When the sensor reaches a certain temperature it opens the contact to the heating elements shutting off the toaster. If the unit is under warranty then take it to a repair facility for Krups. I would not allow anyone to use the toaster. If left on it could cause a fire. Take care, stay safe and good luck with your unit!

Sound like to me you got a problem with the capcitor inside the unit, if its under warrenty it will need to be serviced. If its not I ould be checking capcitors inside to make sure there not bulging leaking or otherwisen ot wroking correctly.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620