You have a vTech phone and it has an emergency pendant?
http://www.mdxelectronics.com/SN6187.html
Manual
http://www.mdxelectronics.com/assets/images/product_detail/SN6187.pdf
SOURCE: Uniden DCT648 register phone problem
On the Base Station select HS Registration then on the Handset hold # for 2 sec
SOURCE: 43-139 5.8 Ghz Corless phone
you may need to RESET the handset before getting them registered to the base station. this will ask for a reset code, just consult the user manual to get it.
if you have other issues just let me know
SOURCE: how to register phones to base unit - uniden dct648
Unplug the unit again and press the intercom/find handset button while you re-connect the adaptor. Then dock the phone unit once again and it will re-register.
SOURCE: cordless phone wont work properly
Unplug The Base than take batteries from the phone after 15 seconds power it back on, viola you should have it working
SOURCE: How do i reset philips voip4332b ip phone base unit to company default.
This should solve your problem:
1. On your phone select: Menu > System > Base Select
Select "Auto" and press "ok"
2. On your phone select: Menu > System > Register
(you might be prompted to enter a PIN if so the default is "0000" )
3. On the base station press and hold down the "Page" button for 4-5 secs until the green light starts to blink. At this point the phone should be now able to find the base station.
133 views
Usually answered in minutes!
×