Question about Ricoh Office Equipment & Supplies
The CIS is defective please replace if not then replace the BiCU is malfunctioning.
Posted on Dec 17, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I do not recognize either of these codes (187 or 387) as part of the Aficio 2015 error list.
If the code is displayed on the screen, physically TURN OFF the copier with the main switch (red switch), wait 10 seconds and turn it back on. If it's an erroneous error, this should reset the error code. NOTE: THE ERROR CODE MUST BE DISPLAYED FOR THIS TO WORK.
Posted on Jul 09, 2008
SOURCE: sc code
Go to sp mode press Clear Modes 107 and press Clear Stop for four seconds. Screen will change enter to SP Modes. enter 2109-1 and execute. then enter 2109-2 and execute. That should do it.
Posted on Jan 03, 2009
That code requires going into the SP (Service Protocol) mode. If you have the service manual, it will tell you which buttons to press to enter it and to exit service mode. Once you enter service mode, power down the printer. If that doesn't reset, you have to go back into service mode, go the the SC/Fuser reset SP and once executed, power down then restart. Hint: you have to go to "SERVICE" then 1 will display. Press the right arrow key until you reach "5" then press the OK button. You can then right or left arrow until you find the reset SP. Good Luck.
Posted on Oct 25, 2013
Tips for a great answer:
Dec 11, 2017 | Office Equipment & Supplies
Oct 24, 2013 | Ricoh Aficio SP C410DN Laser Printer
Jan 13, 2011 | Garden
Jul 08, 2008 | Ricoh Aficio 2015 Copier
36 people viewed this question
Usually answered in minutes!