Question about Bosch Nexxt 300 Series WFMC2201UC

Open Question

Bosch 4.0 Cu. Ft. Nexxt 300 Series Front Load Model WFMC2201UC now the fabric softener will not dispense. Apparently something clogged further down inside.

Purchased from Lowes 2008, detergent and bleach dispenses fine. Have removed tray and soaked in hot water overnight.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

6ya.com

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: Water in detergent dispenser

Remove dispencer again, remove conditioner syphon assembly and clean up the little tube. Should then go okay

Posted on Jul 11, 2007

Ad
zeusfaber

Alastair Macleod

  • 247 Answers

SOURCE: Bleach and fabric softener dispensers full of water

This is a problem common to virtually all front-loaders. Pull the dispenser drawer right out (it is designed to come right out - you might just need to give it a bit of a jiggle to get it past the stop) Remove the cover/caps from the drawer (sometimes this is a snap-on cover over the back of the drawer, sometimes a top-hat shaped cover over the siphon spigots). Give everything a thorough clean off with hot water (scrubbing with an old toothbrush helps), then reassemble. A.

Posted on Jul 16, 2007

Anonymous

  • 1 Answer

SOURCE: Bosch 3.81 cu ft Nexxt 500 Plus bleach not dispensing

We had the same problem with the bleach dispenser. It was under warranty so Lowe's sent a repairman that replaced some part in the control panel that he said was faulty on this model. He also said to only use 1-2 Tablespoons of HE detergent and leave the door open. Also dilute any softeners before adding them.

Posted on Oct 12, 2008

Anonymous

  • 1 Answer

SOURCE: Fabric softener and bleach dispensers

Call the tech. one came out this week and said the system solenoid is always engaged causing the bleach and detergent to dispense when drawer is pushed in

Posted on Feb 22, 2009

Anonymous

  • 101 Answers

SOURCE: Water in the detergent, fabric softener, bleach dispensers

If it's not leaking outside I wouldn't worry

Posted on Oct 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front load washer dispenses fabric softener drawer fills water
either the auto dispenser is sticking , take out and clean with hot water. Or flow control valve needs replacing.

Feb 24, 2014 | Bosch Washing Machines

1 Answer

Fabric softener does not get dispensed into wash on my Bosch Nexxt 500.
Hi emily446,

Take out your Tray from the drawer (Usually un-clips on the sides or top)

Then clean the holes inside the drawer at the roof. There will be small holes, clean these with either ear-buds or toothpicks. These holes get clogged quite often, and cleaning them will allow water through to the machine again.

Also clean the tray, especially near the hole at the back where the fabric softener gets siphoned through.

Kind Regards

JEDEMEYER1

* If this solution helped you, please rate it

Aug 15, 2011 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...

1 Answer

Fabric dispenser still full after washing completed
Hi,

Here is a tip that I wrote about what I found out about the fabric softener not dispensing into the washer...

Fridgidaire Washing Machine Fabric Softner not going into washer

heatman101

Sep 04, 2010 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...

1 Answer

Getting E:13 error on Nexxt 300 series washer
Try putting the washer on COLD and run "TWO" cycles. It must be on COLD. There is a chance there is too much soap or fabric softener in the washer. It may also help to clean the fabric softener tray where you add the softener.

Nov 22, 2009 | Bosch Nexxt 300 Series WFMC2201UC

1 Answer

Shows E13 what is it?
Try putting the washer on COLD and run "TWO" cycles. It must be on COLD. There is a chance there is too much soap or fabric softener in the washer. It may also help to clean the fabric softener tray where you add the softener.

Nov 08, 2009 | Bosch Nexxt 300 Series WFMC2201UC

1 Answer

Water left in fabric dispenser after load
Hi,

The dispensers work by the siphon principle. You load the softener and at the proper time, the machine diverts water to the softener cup raising the level. In the softener cup, there is a tube loosely covered with a cap. When the level in the softener cup is raised high enough, a siphon effect is started and the softener is pulled from the cup into the washer. This will continue until the water quits flowing and air gets under tha cap, breaking the siphon. The amount of water remaining in the cup is dependent on the level of the cap, and the amount of residual water remaining in the dispenser fill tube once the siphon effect is broken. You can see this effect for yourself: take a measuring cup and slowly pour water into the softener cup, raising the level above the max line. When the level gets high enough, the contents of the cup will dispense. You can remove the cover cap that is a part of the dispenser and clean it; it will help. Removing the entire tray and cleaning all of the tubes and the cap assembly will also help. The only other thing that can be done is to change the dispensing supply valve, as it sounds like there may be some leak by after the fabric softener is dispensed. Having residual water isn't really hurting anything. It's only water, and the machine has dispensed the softener! Try the cleaning part first as this usually corrects the issue, and then the repair technician if it still bothers you. For as much as the extnded warranty costs, you should be completely satisfied with your machine.
Best regards, --W/D--

Sep 13, 2009 | Bosch Nexxt 300 Series WFMC2201UC

1 Answer

Some water backs up in the softener dispenser??
Service was here today and tilted the machine backward about 2-4 degrees. This solved the problem. Now fabric dispenser fully empties. Since the machine is 2.5 year old it is possible that over time it settled. I think though it is more likely the cold water dual inlet solenoid that is a bit constricted. If this fix does not last I will change it.

Feb 03, 2009 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...

1 Answer

Bosch Nexxt series washer - water in softener dispenser
Hi. Remove dispenser, and thouroughly clean.
This should solve problem. If problem persists, don't worry about it tomuch, as long as it takes the conditioner down that is the main thing.

Nov 23, 2008 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

Bosch 3.81 cu ft Nexxt 500 Plus bleach not dispensing
We had the same problem with the bleach dispenser. It was under warranty so Lowe's sent a repairman that replaced some part in the control panel that he said was faulty on this model. He also said to only use 1-2 Tablespoons of HE detergent and leave the door open. Also dilute any softeners before adding them.

Sep 13, 2008 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...

2 Answers

My front loader Bosch washing machine is not draining in the fabric softener section.
Make sure it is the fabric softener that is not being added. Try running w/o fabric softener and see if the tray is still full. The reason I am asking is that after I run my washer the fabric softener tray is full, with water, not softener. The factory tells me it is because the water fill nozzles have realigned and overspray into the softener tray. Not a big problem, since my system is under warranty I am having them fix the nozzles and then I will know how to redirect.
If it is the softener that is not being added then check to make sure the line is not clogged. You can lift out the bleach / softener try and check for cloggs.

Aug 18, 2008 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...

Not finding what you are looking for?

View Most Popular

Nexxt 300 Series WFMC2201UC

  • Washing Machines

Related Question

Front load washer dispenses fabric softener drawer fills water

  • Bosch Washing Machines

Open Questions:

0 Answers

how do you get the diagnostic code out of a bosch wfmc 2100uc washer whasher fill and then drains

Jun 29, 2015 | Bosch Nexxt 300 Series WFMC2201UC

0 Answers

need bosch dishwasher manual manual

Sep 02, 2014 | Bosch Nexxt 300 Series WFMC2201UC

0 Answers

My washer keeps showing the E-13 message. I have tried running it without clothes and soap, added just softener, and opened the small door in front and looked at what I thought was the drain filter. It still shows the E-13. What is wrong and how do I fix it?

Jul 07, 2014 | Bosch Nexxt 300 Series WFMC2201UC

0 Answers

start button does not activate door lock and will not turn on

Jul 06, 2014 | Bosch Nexxt 300 Series WFMC2201UC

See all Bosch Nexxt 300 Series WFMC2201UC Questions

Bosch Nexxt 300 Series WFMC2201UC Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

12 Answers
Why is the fault F18 error code on my bosch washing machine flashing?

Bosch Logixx WFT 2806 Front...

5 Answers
E17 error code

Bosch Nexxt 500 Plus WFMC5301UC

3 Answers
How to reset the error codes (F21) on Bosch Maxx

Bosch Washing Machines

9 Answers
Bosch Classixx 6 1200 express has an error code F21 what is it

Bosch Classixx WFO 2866 Front...

4 Answers
Bosch Axxis Washer Detergent slot codes; what do they mean?

Bosch Axxis WFL 2060 Front Load...

Top Bosch Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

jimorris77

Level 3 Expert

411 Answers

Dw Wooten
Dw Wooten

Level 2 Expert

227 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...