What does the alert number 450 indicate? - Cell Phones

All question need FULL 'make model (what it is)', or we just guess.
Yyou posted to the Category 'Garden'. There are 10,00 to choose from.

BSEE Safety Alert 455 - Person Injured when Safety Mechanisms Failed ' Bureau of Safety and Environmental Enforcement.Feb 17, 2023

BSEE Safety Alert 455 - Person Injured when Safety ...

Bureau of Safety and Environmental Enforcement (.gov) https://www.bsee.gov > safety-alerts > bsee-safety-alert-4...
or Furuno FMD-3200

https://www.manualslib.com/manual/1243585/Furuno-Fmd-3200.html?page=314&term=455&selected=1#manual

..

without 'make model (what is is)', it is all guesswork.

https://www.google.com/search?q=alert+455

..

It is crucial to understand that Voice Mail is a
service sometimes offered by the telephone
service provider (whom we used to call "the
phone company"). This Voice Mail is totally
different from the messages we can record &
manage with an Answering Machine System.

Turning off the Voice Mail is a function managed
by the service provider's methods & procedures
and is not specific to the phone instrument itself.

AT&T, GE, Uniden, VTech cordless phones all
include an indicator light or screen display
for alerting "Voice Mail Waiting". Usually the alert
indicator is cleared (turned off) when the user calls
the prescribed telephone number and retrieves
those stored Voice Mails, but not always.

To manually reset (turn off) the alert indicator one
usually scrolls through the phone MENUs to find
a selection labled something like "VMWI Reset?"
and choose "Yes".

Specifics vary by make and model... the model
number of your phone can be found on a small
sticker underneath the battery in the handset
(eg, CS6229).

Take this model number to www.manualslib.com
to download a free copy of the User's Manual
and learn the full details of what your phone
can (and maybe cannot) do for you.

Good luck!
--

Defective toner pump. call a tech

If you are still getting it then either your CMOS battery has failed, or your computer power supply has failed,

Your radio may be functioning normally for the emergency alert. Here is an excerpt from the user guide:

Emergency Alert Mode

The Emergency Alert feature can be used to signal members in your

group of your need for urgent help. MR series radios will operate in an

automatic "hands-free" emergency control mode for a total of 30

seconds after activating the Emergency Alert. MR series radios in your

group will automatically advance the speaker volume to the maximum

setting and sound a warbling alert tone for 8 seconds. The alert tone is

emitted from your own radio speaker and the receiving radios in your

group. After the 8 second alert, any spoken words or incidental sounds at

your end will be transmitted to the group for 22 seconds. For the 30

second duration of Emergency Alert mode, MR series radio controls and

buttons will be locked to maximize reception of the emergency message.

1. Press and hold the Emergency Alert button for 3 seconds.

2. Release the button after the LED Indicator glows red and the alert tone

begins to sound. There is no need to continue to hold the Emergency

Alert button or use PTT for your message to be transmitted.

3. After the alert tone ends you may speak into the microphone. Your

voice or incidental sounds will be transmitted. The LED indicator will

continue to glow for the duration of the 22 second period.

4. After 30 seconds your radio speaker will emit a Talk Confirmation

Tone and the LED Indicator will extinguish. Operation then returns to
normal two-way mode.

Note: All Motorola Talkabout EM, MJ, and MR series radios are fully

compatible with the Emergency Alert feature. Radios other than EM, MJ,

MR series can receive the emergency alert signal, but will not respond

with adjusted volume settings, locked controls, or a warbling alert tone.

Users of other radio models set to the same channel and Interference

Eliminator Code will hear a steady tone for 8 seconds followed by the

voice transmission for 22 seconds.

Warning: The Emergency Alert feature should only be used in the event

of an actual emergency. Motorola is not responsible if there is no
response to the emergency alert from the receiving group.

Here is a link to the user guide: http://www.giantintl.com/ContentManage/manuals/Moto/MR350-351%20User%20Guide%2012-16-08%20KEM-PK14190-90.pdf

Best regards.

It's normally indicated by numbers of bars in your battery symbol. The lower number of bars, the lower the charge. There MAY be a low battery alert symbol that flashes when your battery charge is at a minimum. Make sure you carry fresh batteries with you just in case.

from the main menu press this
menu button
menu button use scroll to select unhide all
find you icon, unhide it , then press menu button again and select hide all

LED Display gives you your display visual alerts, signal strength, and operation mode. Here is an attached link for the manual.....http://www.uniden.com/pdf/LRD6399SWSom.pdf
But to answer your question here is what the difference between the green light and the red light are:
1. X-Band Signal Indicator—A green LED lights and blinks to
indicate the presence of an X-band radar signal. The blink rate
increases as the radar source gets closer. A distinct audio alert is
also heard.
2. K-Band Indicator— An amber (orange) LED lights and blinks to
indicate the presence of a K-band radar. The blink rate increases as
the radar source gets closer. A distinct audio alert is also heard.
3. Ka-SuperWideband Signal Indicator— A yellow LED lights and
blinks to indicate the presence of a Ka-SuperWideband radar
signal. The blink rate increases as the radar source gets closer. A
distinct audio alert is also heard.
4. Laser Signal Indicator— A red LED under L lights and blinks to
indicate the presence of a laser signal. A distinct audio alert is also
heard.
5. SWS Signal Indicator— When an early warning hazard or
informational signal is detected, the yellow SWS LED begins to
blink and the amber K-band LED lights. A distinct audio alert is
also heard.
6. Power-On Indicator— A green LED under P lights to indicate
power is being supplied to the unit and the unit is turned on.
7. LED Signal Strength Meter—Four LEDs give an accurate visual
indication of the strength of radar or laser signals.
8. City Mode Indicator—A green LED under C lights to indicate
that you selected City Mode.
9. Auto Mute Indicator— A red LED under M lights to indicate that
you selected the Auto Mute feature.

Please make sure you give me a rating and I hope this helps,
cbinny1

1600 MEANS THE CONTACT NUMBER OF THE DEALER...LOOK THE SC WHAT THE NEXT NUMBER INDICATE.