Can I connect my Cricut expression to my computer?

SOURCE: need to update firm ware on cricut expression so i can use sure cuts alot could not find at cricut.com

Go to
http://torrent-finder.com/open/36-Fulldls.com/%20update%20drivers%20

and use torrent to download the program
Use it to update any driver
Enjoy
[email protected]

SOURCE: Cricut Expressions Machine error

1. Make sure your cricut is off when you plug it into your computer via usb.
   
2. Make sure your usb cable is plugged directly into the machine, and not to a usb hub.
   
3. Start up the DS Once the DS is fully loaded, choose HELP > UPDATE FIRMWARE.
   
4. On the cricut machine, hold down the STOP button. Keep holding it down and briefly hold down the power button. Keep holding down the stop button and in about 3-5 seconds, you will hear a beep. That means you are good to go.
   
5. On the "update firmware" screen on your computer, select the model you have and then click "begin updating now"
   
6. Go and read a magazine or make a cup of tea because it takes a while to update. If it goes really fast (no matter how cool your computer is) it means it did not install properly and you will probably have to do it over again.

SOURCE: My Cricut Expression keeps turning on and off.

I have one of these machines stripped down on the bench now with this problem. I have located the fault to a power relay which is sealed but must have burnt contacts as it is not passing the power to the machine to power up. I am still looking for a source of 18 volt coil relays with 10 amp contacts to fix this one. If not I may have to modify the circuit to overcome this problem.

SOURCE: I need a manual for a cricut expression

www.manualsonline.com/