How can I Setup Brother MFC-l2750dw XL Printer?

SOURCE: reset drum - brother mfc-8860dn

Open front cover

Remove drum unit and toner cartridge assembly

Put drum unit and toner cartridge assembly back in machine, but do no close front cover.

Press Clear/Back
You will get a message "Replace Drum?"
Select Yes to confirm

Gary

• 301 Answers
• Posted on Jan 22, 2009

SOURCE: Brother MFC-210C All-In-One InkJet Printer ERROR 4F

Access the internal maintenance mode by pressing the Menu/Set button, then press * 2 8 6 4 within 2 seconds.
This should put you in the maintenance mode menu.
Enter 80, then scroll down with the arrow down (round) key.
You'll find an entry listed as purge count.
If number is over 6000, enter 2 7 8 3.

This will reset the purge count value. Then restart you printer.

SOURCE: "brother mfc 7840w printer goes offline and i cannot print need turn printer on and off.

The solution, and it took me a long time to find the simple solution, is to right click on your printer, click properties, click the ports tab and click on your Brother printer and click on configure port (or you can delete the existing one and then add another one). What you want to do is update the IP Address. The problem is that the printer does not have a static IP address, it is dynamic. If you want to confirm that, go to your printer and press the reports button and print out the network configuration report. Your IP address will show on that. It's really the last digit in the IP address that changes. This will absolutely solve your problem. Good Luck!

SOURCE: how do I network brother mfc-440cn printer - what

1. Plug the printer into a computer on your network.
2. This computer must be on and remain on for the printer to work.
3. Add this local printer to this computer in "Control Panel" - "Printers".
4. Now share the printer.
5. Go to another computer on your network.
6. Add this printer (as a network printer) to this computer in "Control Panel" - "Printers".
7. The system should find the printer and add it...

SOURCE: brother mfc-215c unable to clean?

I have the same problem my printer (a MFC-215C) is unable to clean and when I press Menu/set I do not have "Black print"? So what do I do now?????? HELP... Thanks Nathalie