Question about Measuring Tools & Sensors

Open Question

I have Acurite #75077A1. New sensor new batteries in both units. sensor not working tried to resync but no change?

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: Wireless sensor quits working

take it back

Posted on Mar 15, 2008

Ad

Anonymous

  • 28 Answers

SOURCE: + and - buttons work and A. Nothing else

well for 1 thing..............banging the remote on things could break it some more............but to fix the problem you should buy a new wii remote

Posted on Aug 09, 2009

Anonymous

  • 19 Answers

SOURCE: Wii Remotes will not resync after using friends Fit Board

there is a flap in the wii open it up. open the spot where the batteries go on the controller. the controller and the wii should have a orange butten press them both at the same time.

Posted on Aug 21, 2009

knyoj

  • 1 Answer

SOURCE: acurite 1097-rx will not display outside temp or

I had same problem. Take all batteries out of both units. Put the batteries in the remote sensor FIRST. Then put batteries in the main unit. Within five minutes, they will link up. Problem solved!

Posted on May 11, 2010

billklucas

  • 1 Answer

SOURCE: I have the Acurite 00604RX

how do i set my clock for accurite 00604RX

Posted on Sep 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why can't I receive input from the outside sending unit?


Make sure that all the batteries are good!!
This procedure outlines the typical process to pair the sensor and base.
Base Station Battery Installation

·Remove the printed vinyl label from the LCD screen of the base station
·Position the remote sensor near the base station
·Open the battery compartment at the back of the base station and insert (2) AA batteries according to the polarity markings. Replace the battery compartment cover.
·Within a short time the RF signal icon (located to the left of the outdoor temperature channel indicator) will start flashing. This indicates that the base station is ready to pick up the RF outdoor temperature signal from the remote sensor. It will continue to flash for 3 minutes or until the signal from the remote sensor is detected.

Register the Remote Sensor
·Open the battery compartment at the back of the remote sensor and slide the channel selector switch to your desired channel. For the first remote you may select any channel, for additional remotes select any unused channel
·Insert (2) AAA batteries according to the polarity markings. Be sure to install the batteries in the remote within the time that the RF signal icon is flashing on the base station. 1541 WeatherGuide Wireless Weather Forecaster with Barometer

Jan 07, 2016 | Measuring Tools & Sensors

2 Answers

How do I reset the remote after changing the battery life.


To reset your unit, please verify that you are using a good-quality, standard alkaline battery such as Energizer or Rayovac. Then, follow the steps below.

1. Bring both the sensor and display unit indoors and remove at least one battery from each.
2. Make sure the A-B-C switch on both units match. Sometimes changing to a different channel can help.
3. Reinstall the battery in the outdoor sensor.

4. Reinstall the battery in the display unit.
5. Let the units sit within a couple feet of each other for about 20 minutes to gain a strong connection.

If you need any further assistance, please contact AcuRite Customer Support at 1-877-221-1252 or info@chaney-inst.com.

Feb 21, 2015 | AcuRite Acu-Rite 00754 Wireless...

2 Answers

My acurite model75321a1 does not tell out side temperature


I checked my Acurite instruction file and found it rather vague about this issue but based on my experience with a similar system I found that battery changes have to be made at the transmitter first, allowing time for the transmitter to begin sending temperature data. Also, the Acurite instructions suggest use of lithium batteries in the transmitter where extreme low temperatures are encountered. My experience has been that the transmitter stops working at low temperatures so the reading comes and goes depending upon the weather. Currently it is 20 degrees F outside headed for 5.

Feb 01, 2015 | Measuring Tools & Sensors

2 Answers

Model 00754W4 does not sense outside temperature..new batteries have been placed correctly in both inside and outside units..noW what do I do?


We would recommend a reset of your unit. Please verify that you are using good-quality, standard alkaline batteries such as Energizer or Rayovac, then follow the steps below.
1. Bring both the sensor and display unit indoors and remove at least one battery from each.
2. Make sure the A-B-C switch on both units match. Sometimes changing to a different channel can help.
3. Reinstall the battery in the outdoor sensor.

4. Reinstall the battery in the display unit.
5. Let the units sit within a couple feet of each other for about 20 minutes to gain a strong connection.
If you need any further assistance, please contact AcuRite Customer Support at 1-877-221-1252 or info@chaney-inst.com.

Dec 03, 2014 | Acu-Rite Acurite Wireless Indooroutdoor...

1 Answer

Manual for model 00592txr


sending unit is too close , it needs to be at least four feet away from unit

Nov 11, 2014 | Acu-Rite AcuRite IndoorOutdoor Wireless...

1 Answer

Acurite wireless weather will not work new last season all new lithium batteries in right and were checked no picture #'s on screen


Hi Jerry,

While lithium batteries are recommended for the outdoor sensor it is not recommended they be used in the indoor display unit. Try using a good quality, fresh alkaline batteries and you should find your display turns back on.

Nov 01, 2014 | Acu-Rite Acurite Wireless Weather...

1 Answer

How to reset my Acurite 1099rx after replacing battery


http://www.acurite.com/advancedsearch/result/?q=1099RX

There is no reset button, installing new batteries causes the sensor to reset itself.

Try removing and re-installing the batteries.

Good luck,
Steve

Jan 15, 2013 | Measuring Tools & Sensors

1 Answer

My acu-rite wireless thermometer model #00604RX isn't capturing the wireless sensor signal..both have new batteries and worked before changing old battery..reset the buttons too...help


Double check the batteries and the direction in which they are installed. If there is one backwards in the sending unit that is outside, it will not send a signal. Also, there is typically one battery in the indoor unit that is responsible for receiving the signal from the outdoor unit. If all of the batteries are in correctly except that battery, you will see the display, but will not get the data transmitted from the outside sending unit.

Sep 18, 2010 | Acu-Rite Acurite Wireless Weather...

1 Answer

Acurite 1097-rx will not display outside temp or humidity. new batteries. Inside functions normal.


I had same problem. Take all batteries out of both units. Put the batteries in the remote sensor FIRST. Then put batteries in the main unit. Within five minutes, they will link up. Problem solved!

Feb 23, 2010 | Acu-Rite Audio Players & Recorders

1 Answer

Wii Remotes will not resync after using friends Fit Board


there is a flap in the wii open it up. open the spot where the batteries go on the controller. the controller and the wii should have a orange butten press them both at the same time.

Aug 20, 2009 | Nintendo Wii Console

Not finding what you are looking for?
Measuring Tools & Sensors Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Measuring Tools & Sensors Experts

Vuk B

Level 3 Expert

717 Answers

Brad Brown

Level 3 Expert

18110 Answers

Tom Chichester

Level 3 Expert

54386 Answers

Are you a Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...