Can I get pre wound bobbins for the Pacesetter PS 1250?

My method may not be the best but it does work. If you have a plastic or metal bobbin with a hole in it thread the thread through the hole where you would have a 1/2 inch piece hanging out as you put it on the bobbin winder. Hold it tight engage the pedal and hold it the whole time you are winding your bobbin. Hope this helps.

here is a link for parts for the machine
http://www.sewingpartsonline.com/brother-ps-1250-sewing-machine-parts.aspx

here are 2 links for a manual that should tell how to attach
a ruffler

http://www.sewingpartsonline.com/instruction-manual-brother-ps-1250-instant-download.aspx

http://www.sewingpartsonline.com/instruction-manual-brother-ps-1250.aspx

try these links for manual one if for a download & the other is a
hard copy
http://www.sewingpartsonline.com/instruction-manual-brother-ps-1250.aspx

http://www.sewingpartsonline.com/instruction-manual-brother-ps-1250-instant-download.aspx

try
ebay
sewingpartsonline.com
sew4less.com

sound like the machine is out of time & needs to be serviced by a technican that has the tools to time it

sewingpartsonline.com has parts for the ps 1250

just go to the home page & find the brother parts & on the next page look for the ps1250-- it's

towards the middle on the left

you might check your needle to see if it's damaged
make sure you have a 3 to 4 inch thread tail on top & bobbin thread, & hold top thread tail & use the hand wheel on the right & manually move the needle down to see if it will pick up the bobbin thread that way
also check the bobbin area for lint or loose threads

i need zipper foot and the quilt foot

I found the manual on line and the other posts at fixya.com helped me solve the problem.