65" toshiba projection tv no picture but has sound..

try the audio settings on the chanel you dvd player is on the tv

You do not have individual lamps in that model. You have 3 individual picture tubes of which I don't believe they are bad. They have fluid in a reservoir that becomes cloudy after time and needs to be replaced, however this is something you cannot do yourself. I recommend you call a qualified technician to take care of it for you.

dust this tv havr fuse and where ,what tv it look like 3d but is not

Call Toshiba Tech support...tell them # of blinks

Hi,do you hear any strange noises? If you hear clicking or like wanting to turn on it could be the board that powers the lamp it's called the ballast. But if you don't hear any strange noises,tv is around 6000 hrs,2-4 yrs it could be time to replace the lamp.The lamp you need is XL-2200.You can find it here: http://www.discount-merchant.com/Sony-XL-2200-TV-Bare-Lamp-Bulb-p/sony_xl-2200u_a1601753a_lamp.htm?Click=48173 Have a blessed one!

Sound like the color wheel exploded. When this happens the tv will not let it turn on, now for the real bad news,,,, Toshiba does not supply just the color wheel, you will have to replace the entire light engine for around $450.00 to $650.00

Power boards are like time bombs. When it's time is up, it's up. Since it is 3 yrs old, I would buy a new tv. Most TV parts only last 3-5 years anyways. It did a good job.

It sounds like cold solder joints on the vertical IC chip. Not a major deal. The entire board should be looked over for other joints becoming cold.

Possibly Replace Attenna CABLE

burn in on one of the tubes try magic focus?