I cannot get my hd box to overwride my analog tv

Why can't i get a picture on my sky box

2577 worked for me for the Bpdp 42 hd bush tv

HDMI Tv's have a HDMI input and connect that the to the HDMI input on back of HD Sky box if not HD ready TV you'll have either 1 or 2 F-Connectors which go from Dish to input points1 and 2 on the back of the sky box then Scart lead from box to TV -

Click the following link or cut and paste it into your browser:-

http://www.sky.com/helpcentre/export/sites/www.sky.com/helpcentre/tv/anytime-plus/__Content/hd_manual.pdf_1314843347.pdf

I've assumed you're asking about the regular Sky+ HD box and not the Sky+ HD 1TB box, if I'm wrong then use the next link:-

http://www.sky.com/helpcentre/export/sites/www.sky.com/helpcentre/tv/anytime-plus/__Content/1TB_Manual.pdf_1314843347.pdf

I hope that my free answer has been prompt and helpful, if so then please take a brief moment to rate my reply.

Change the cables, not the box.

This isn't possible, the USB on the front of the Sky HD box is not active. I don't have any information on whether it will be in the future.

Your only option is to connect the iPod via TV or if you have a surround sound amp

It not the tv,u restart the Sky HD box the signal come back right?The Sky HD box is the problems,replaced the box,u will solved this problems.

In order to get any of the Freesat channels, you need to connect a Satellite dish to your TV. If you have a Sky dish, you simply need to run an extra Cable from the LNB from the dish and connect to your socket on the back of your TV.
In order to get Freeview channels and Analogue channels, you need to connect a aerial to the back of the TV.
There is a menu option for the TV to start straight to the AV input (your Sky HD box). It is Menu > Setup > Other Settings > Power on Preference. Select 'AV' for your TV to start on Sky HD.
Also even if you have your TV to start on TV, when you turn on your Sky HD box, it should automatically switch to the Sky box.

Sounds like from discription the sky feed is set up for analog channel 6. With my TV-HVR-1600 card, there is an option in the wintv application when you click the menu button in the application that says channel suite. If you select this option, you should find and option for analog source. Select analog source in this screen and you should be able to manually add channel 6 in the box at the top of the analog souce screen. Also if you have the sky feed connected and you you click the scan button on this screen, it should detect automatically is the sky feed is on.

An HD TV connects in the same way as a standard TV.

Connect a scart lead from the TV scart of the Sky box to the TV.

When you switch on the Sky box it should automatically switch the TV to the correct external input.