Question about Phonic Music

Open Question

Power supply phonic mm1805x mixer I can't find it?

Posted by on


3 Suggested Answers


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017



  • 17 Answers

SOURCE: how many volt? for power supply phonic mixer MM 1202

Here's the answer

Posted on Mar 31, 2013


Joe Patch

  • 336 Answers

SOURCE: how many volt , ac.or dc. for power supply phonic MM1202 mixer

I tells the power supply model numbers on the back of the unit above the power connector plug. It doesn't tell the specs as of how many amps but does describe several voltages of AC it would work on and also gives several model numbers of the correct power units that are sufficient. If you don't use one the recommended units, it could malfunction and give extra static noises caused by improper filtering of the power. It shows on page 8 of this manual:

I hope this helps you.

Posted on Apr 03, 2013

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where can i by a new power unit for my Phonic Impact mixer

Fixya is unable to suggest a source for a replacement Phonic power unit.

Apr 05, 2018 | Phonic Music

1 Answer

How to connect speakers to phonic mr3243 mixer

You would connect the xlr left and right outputs to a power amplifier and then the speakers to the power amp. The mixer will not drive a set of speakers by itself.

Jan 19, 2015 | Phonic Music

1 Answer

Low signal from mic to computer

If your using a condenser mic, make sure you are supplying it with phantom power. Use the faders to cut/boost for volume control

Mar 29, 2011 | Phonic NEW PHONIC SONIC STATION 22 MIXER...

1 Answer

Phantom power will not wor on my phonic 620 cd jacks will work but when i plug in a mic it will not work help

I assume you are using CONDENSER microphones, as these are really the only ones that can use Phantom power. Also do NOT use any MONAURAL connections to MIC jacks while using Phantom power.

Dec 12, 2010 | Phonic NEW PHONIC SONIC STATION 22 MIXER...

1 Answer

I have a Phonic Helix Board 24 firewire MK2 When i open it all the peak led stays open I think the power suply is busted I need an expert

The power supply uses three, 3 terminal regulator chips. You should find +/- 15 volts and +5 volts DC from those. There are two fuses, one for each polarity. If one of those is blown, that would cause the problem and one would need to find WHY it blew before replacing it.
You need to find a competent electronics repair person.

Nov 02, 2010 | Phonic Helix18fw 18 Channel Mixer with...

1 Answer

Phonic Helix Board sound problems

You don't specify which model Phonic mixer in question.
Is it a powered mixer ? And are you plugging your speakers into the speaker outputs ? If it's not a powered mixer and you're plugging speakers into the Line Outputs, you're not using a power amplifier between the line outputs and your speakers - this won't work.
If it is a powered mixer and you are plugging speakers into the speaker output connectors and still getting little or no sound, check your speaker cables and the speakers themselves by plugging them into known good amps.

Jul 03, 2009 | Phonic Helix18fw 18 Channel Mixer with...

Not finding what you are looking for?
Music Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phonic Music Experts


Level 3 Expert

85222 Answers

Gottie Ste

Level 2 Expert

89 Answers


Level 3 Expert

3156 Answers

Are you a Phonic Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides