[ARC20x User Guide p20: 11 Handset Registration]
To register a new handset:
- Press and hold the HANDSET LOCATOR on the base unit until you hear Registration tone (repeated 'beeps')
- On the handset, press the PROG then the UP or DOWN button to display "REGISTER"
- Press the PHONE/OK
-> The display shows "BS 1234". If any of these numbers is steady (not flashing), then the handset is already registered to that base unit.
- Press 1 to select base unit number 1
-> The display shows "BASE PIN _ _ _ _"
- Key in the system PIN (default 0000) and press the PHONE/OK
-> The display shows "WAIT _ _ _ _" for a few moments, while the handset searches for a base. Then it shows a list of handset numbers which are still free on the base unit.
(For example, "1 34 6" indicates that numbers 1, 3, 4 and 6 are free; 2 and 5 are already assigned to other handsets.)
- Key in a free handset number
-> After a moment, the display should show the handset's name and number.
If registration fails...
- Try again, making sure you begin step 2 as soon ans Registration tone starts.
×