Reverse sewing on Model 4595 Necchi - Necchi Sewing Machines

Tighten the screw under the plate near the feed dog

sewusa.com has some threading diagrams

& you can also see if sewingpartsonline.com or premiersewing.com
have manual for the sewing machine

try
sewingpartsonline.com
ebay
necchi sewing machine dealer

Hi! I found your manual at http://www.sewusa.com/Sewing_Machine_Manuals/Necchi_Manuals/4795_Instruction_Manual.htm

Happy Sewing!

Robbie

Increase the pressure on the presser bar. Usually this is located right above on the top of the machine.

It's just in the front panel, where the drawing of all the built in stitches are, it's the drawing number eleven from the left, you'll see a zig zag (red) and a straight stitch (black) Select A group of stitches (knob with the arrow) and then select the eleventh stitch (same knob but use the dial, look the manual) and then select zero on your stitch width dial. Hope that helps :)

http://www.sew4less.com/product/2034/Low_ShankEven_Feed_and_Walking_Foot_and_Quilting_Foot_10449

http://www.sewusa.com/Threading_Diagrams/Threading_Pages/Necchi_Sewing_Machine_Threading/Necchi_4795_threading_Diagram.htm