Does water come out what if doesn't fit in window all the way

hi there!
The program doesn't fit on computer screen because the resolution of computer screen is too low. could you right click on the desktop and change resolution of screen to higher. I guest your current is 800x600. Change it to higher will fix your problem.
( another way to change to enter button is using Tab key on the keyboard. Every time you hit Tab key, it will move to next button on the program.Try Tab and hit Enter on the keyboard.)
Hope this will help.

What setting.get are you speaking of? If its the water level you can adjust that by the screw on the side of fill valve.

It's Proably Broken...
If "Doesn't Register" Means "Won't Act like im doing something to it"
I'm Probaly Right,

Sounds like the starter winding is bad.
The cutter disc is welded directly to motor shaft. So is the allen wrench fitting.
So if disc rotates freely, then you should be able to feel the allan wrench fitting rotate too.
Use broomstick instead of hand down disposal.
If motor hums and cutter disc does not spin, but cutter disc can be moved freely, then disposal needs to be replaced.
I wish they made repairable motors so that metal and copper doesn't get thrown into the scrap recycle metal bin.

I wrote ez disposal replacement tips:
http://beta.fixya.com/support/r7929008-replace_garbage_disposal

You need an "Ice Maker" installation kit.

Check your by-pass valve(s) at back of water heater. Water goes in cold to bottom fitting, and out hot at top fitting, so those 2 valves ( if any) need to be open, anything in between needs to be closed. There are a few different by-pass set-ups, so if that doesn't explain it, get back to me with a description of your valve set-up and I'll guide you through it. If valve(s) are all in proper position and still no flow through hot line, I'd suspect faulty check valve in between hot line connection and tank.

the recharge kit will only fit on the low side fitting which is the smaller fitting on the larger lines/hoses. If it doesn't fit on the fitting you have tried than you are probably trying to put it on the high side fitting which is the larger fitting on the smaller lines/hoses. I think the low side fitting is on the receiver drier on this model which is the canister looking thing back by the passenger side of the firewall.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

You may have the top on backwards. The flap is usually used as a sun shade, and should probably be over the open part in front of the stroller.

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} What you are describing sounds like a quick connect fitting. I have included a link below to a video that explains how this type of fitting works. If you are using plastic tubing with these fittings you may be able to remove the tubing from the fitting and cut back about ½” from the end of the tubing and reinsert it into the fitting. Do not cut the tubing with scissors, use a tubing cutter or razor blade knife (see video). If that doesn’t solve the leak and you find that you need to replace any fittings we have a complete selection located here: http://www.freshwatersystems.com/c-276-fittings-valves-tubing.aspx


Geoff D., CWS-I - WQA Certified Water Specialist

Fresh Water Systems, Inc - http://www.freshwatersystems.com 1.877.335.3339