Question about Hobart Dishwashers

Open Question

Hobart HL 600 with error code 9999? only fix right now is to do a restart.

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 45 Answers

SOURCE: error code 9999

okay, if i were you i would try to upgrade to the latest firmware, v20 using the software updater!! apparently they have fixed loads of bugs, including the front camera!!

hope this helps

Posted on Dec 06, 2007

Ad

Anonymous

  • 81 Answers

SOURCE: HOBART HL 600 NOT WORKING.SPEED & TIMMER ALL

What'd ya do to that poor little workhorse? You need a Hobart service guy. The power is not getting from the switch to the motor. Could be a disconnected wire (on the simple side), could be the start capacitor. Did you turn the timer on? If you don't the mixer won't run! That is a 220V, don't stick your hands in there when it is plugged in.

Posted on Sep 01, 2009

monomoy

  • 110 Answers

SOURCE: what is error code 99

error 99 stands for communication fault between timer board and the sr drive.there are 5 things that can cause this error.1.rs-485 cable disconnected or malfunction 2.1 con monitordisconnected or malfunction. 3.run/stop wiring disconnected or malfunction. 4.timer board malfunction. 5.sr drive malfunction. hope this helps, dont forget to vote, thanks, monomoy

Posted on Feb 05, 2010

vestxre

  • 119 Answers

SOURCE: our hobart HL 600,no display

If you have 24 VAC to the timer board and still have no display, then you need a new timer board.

Posted on Aug 06, 2010

vestxre

  • 119 Answers

SOURCE: I need the pinion belvet

Check www.hobartservice.com for your local Hobart office.

Posted on Sep 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Solicito diagrama electrco de batidora hobart hl 600 ya que no logro que funcione el motor electrico


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Feb 23, 2015 | Televison & Video

2 Answers

Our hobart HL 600,no display in speed and timer,even there a 24vac,supply in timer controller,only bowl up and down are working


If you have 24 VAC to the timer board and still have no display, then you need a new timer board.

Aug 02, 2010 | Hobart H600 Stand Mixer

1 Answer

What is error code 99 for a hobart HL 600 mixer?


error 99 stands for communication fault between timer board and the sr drive.there are 5 things that can cause this error.1.rs-485 cable disconnected or malfunction 2.1 con monitordisconnected or malfunction. 3.run/stop wiring disconnected or malfunction. 4.timer board malfunction. 5.sr drive malfunction. hope this helps, dont forget to vote, thanks, monomoy

Jan 29, 2010 | Hobart HL600 Legacy Stand Mixer

1 Answer

HOBART HL 600 NOT WORKING.SPEED & TIMMER ALL LIGHTS WORKING BUT NO MOTOR FUNCTIONS.


What'd ya do to that poor little workhorse? You need a Hobart service guy. The power is not getting from the switch to the motor. Could be a disconnected wire (on the simple side), could be the start capacitor. Did you turn the timer on? If you don't the mixer won't run! That is a 220V, don't stick your hands in there when it is plugged in.

Sep 01, 2009 | Hobart H600 Stand Mixer

1 Answer

Code 10 on HL-DT-ST DVDRAM GSA-T20L ATA Device


Code 10 is a general device failure.

This either means the driver is corrupted or your device has failed.

If you have seen the Code 10 Error you're already in device manager, right click on the device and uninstall it. Once this is done, restart the computer and allow it to reinstall. If it works you're done.

If it doesn't go to www.microsoft.com/kb/341060 then scroll down and click on the "Fix It" button. Restart when instructed.

Lastly if that doesn't work the drive is likely dead, replace it with a new drive they only cost $35-$50 these days.

Hope this helps FixYa,

Chris

Jul 17, 2009 | Computers & Internet

3 Answers

Oil change for hobart h-600 mixer


Needed to know which part to open up to add or change oil on Hobart Mixer h-600

Mar 05, 2009 | Hobart H600 Stand Mixer

2 Answers

Hobart dishwaser


I have attached photo of my ecomax dishwasher machine please let me know how to fix the error, it’s still all 4 lights are flashing
3_9_2019_7_06_50_am.jpeg

Jan 14, 2008 | Hobart Dishwashers

1 Answer

Error code 9999


okay, if i were you i would try to upgrade to the latest firmware, v20 using the software updater!! apparently they have fixed loads of bugs, including the front camera!!

hope this helps

Dec 03, 2007 | Nokia N95 Cellular Phone

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Dishwashers Experts

GPEC

Level 1 Expert

12 Answers

Jason

Level 2 Expert

218 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a Hobart Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...