Connex 3300 How do I tweak and peak this radio?? Also, where is R240 in the circuit boarrd??

A standard 3300 hp I seen get up to 40 watts peak,
normally I would turn the audio pot up all the way never snip anything and deadkey down to 2 watts. Than adjust for forward swing, I also never run a pwr mic. Good luck

The manual is only available for purchase. Sorry.

So, I can't tell you where the R240 is located. But here is a link to buy the manual. Or here for a "tune-up" manual.

Hope this helps.

4600 turbo? 3300hp? never heard of a 3300 turbo

3300 https://www.bellscb.com/products/tenmeter/connex/manuals/Connex_CX-3300HP_OM.pdf

4600 turbo http://www.manualslib.com/manual/966347/Connex-4600-Turbo.html

4300 hp and turbo Owners Manual

I just answered that in the link below
http://www.fixya.com/answer/answerpageslideview.aspx?ctg=89&fml=0&brd=3150&thid=23542883

modulation cut r249 & r246 these are limiters no limiters loud modu this radio is the same board as the 3300 connex
am low power adj vr 13 high power L 32 L 33

The Cobra 29 has always been a good talking radio and is preferred by truck driver mainly for that reason! The Connex is a great radio in it's own right but sometimes needs a little help. I would suggest a power mic and there are many to choose from but Astatic is a clear winner! My two cents for a suggestion!

peak receive? Not sure what you mean. You don't peak receive.

If you want to align the receive, then you will need some specialized equipment. Oscilloscope etc.

You need to supply more information regarding make model type
am / uhf etc.........Cheers

A word of advice, never buy a radio second hand. Used radios are sold for some odd reason, and it may be because it is broken. And yes you can do it with your meter, you just have to tune the radio using Coarse and Fine adjustments, also use peaking if you know how, to get a better transmit and receive.

Good luck!

go to www.cbtricks.com and look under radio inf and youll find all the info you need