My left joystick on my xbox 360 wireless controller will not click how do i fix it myself?

When my kids controller does that sometimes taking out the batteries works

Buy this
http://dx.com/p/replacement-thumb-joystick-stick-cap-for-xbox-controller-black-pair-134323

And open the controller to replace it

Sometimes your joystick on xbox controllers can become stuck. To fix this you can do one of two things. you can ether buy a can of air used to clean out computer keyboards and spray it inside the analog stick. Sometimes if that does not work you can also disassemble your controller with a t8 torc screwdriver. Ones disassembled use hot water on and below the analog stick to get rid of unwanted grim. This should fix the problem.

Sad to say but you have to replace the joystick. If the joystick board is damaged, there's no way to repair it.

Hope this helps. :D

I have the same problem. I don't just have 50 dallors to go spend on another.Can I fix it.I don't know what screw driver I need!!!!Thanks alout....

try to reset button on the both side (xbox and controller))
at same time it will work

for xbox reset buuton on the side censor
for joystick above the battery

Please call 1-800-4MY-XBOX for troubleshooting steps.j

Not hard the controllers wireless are all the same. You need a special tool a t8 torq tamper tool go on ebay they have them cheap with that you will be able to swap parts. remember there is one hidden screw in the lower center of the controller under the serial number sticker

The joystick breaks when a plastic piece inside breaks. This problem can be fixed using parts from a second broken controller. Open both controller cases, take a good joystick from one (can be left or right) and replace the broken piece in the other. You'll need a soldering iron, solder, and desoldering braid. You don't want to use a desoldering pump as the contacts come off the board VERY easily.

I would put super glue on it to secure it