My KM 1635 copier is giving me blank copies, NO image at all! When I increase the copy density to dark I see only very light image
FIRSTLY CHECK THE DRUM UNIT CONNECTER ,,LOWER UNIT IS LOCKED OR NO YOU LOCKED THE LOWER UNIT AND THEN CLEAN THE CHARGER OR CHANGE THE KARONARO WIRE
Ensure your drum unit is getting proper contact with motherboard. Clean crona wire of the drum unit using spirit. If the problem presists clean the thin glass plate in the main laser unit (lens).
Ensure that you have cleaned the main and transfer corona's as shown by the instruction leaflet that comes in the box of toner.Also ensure that the large left cover is correctly closed.It is possible that your copy paper is very damp so try changing it for fresh paper or put 20 sheets in the microwave for around 15 seconds to remove the excess moisture.Also are you using genuine toner?
It may be the problem of moisture dont worry take brasso(used for shining the mitallic products) and put out photo conducting drum and clean the dum with brasso by using a soft cotton cloth ur problem must be solved
544 views
Usually answered in minutes!
Kyocera Mita 1635
×